FRONT PANEL DESCRIPTION Krell® Industries, Inc. BACK PANEL DESCRIPTION 45 Connair Road REMOTE CONTROL DESCRIPTION Orange, CT 06477-3650 USA Battery Installation and Removal CONNECTING THE KAV-250cd TEL 203-799-9954 TO YOUR SYSTEM FAX 203-799-9796 TRACK PROGRAMMING E-MAIL krell@krellonline.com WARRANTY RETURN AUTHORIZATION WEB SITE www.krellonline.com...
(73/23/EEC). Notes If any of these items are not included, please Introduction contact your authorized Krell ® dealer or dis- tributor immediately for assistance. Thank you for your purchase of the Krell Save all packing materials, ff you must ship KAV-250cd.
FIGURE 1 KAV-250cd FRONT PANEL 1 Power Button 5 CD Transport Drawer 2 Power LED 6 Infrared Sensor 3 Stand-by LED 7 Display Window 4 Transport Function Buttons: 8 HDCD~ LED Stop, Play, Pause, Open/Close, I~ Track Back, ~,1 Track Forward...
1 Power Button dity or moisture. Use this button to turn the KAV-250cd on and off. Although well shielded, the KAV-250cd should not be placed near hum sensi- 2 Power LED...
FIGURE 2 KAV-250cd BACK PANEL 9 Digital Output 13 12 VDC Remote Power In 10 Left and Right Balanced 14 Left and Right Single Analog Outputs Ended RCA Analog Outputs 11 RC-5 Input 12 IEC Connector...
10 Left and Right Balanced Analog The main display window provides status Outputs information on CD playback, mode, and pro- The KAV-250cd is equipped with one set of gramming. balanced outputs via XLR connectors. 8 HDCD ~ LED 11 RC-5 IN (Input) The HDCD ®1 LED illuminates...
23 Play Key Access Pad Note: Some keys on the remote control do not function with the KAV-250cd. Press the CD key(15) on the remote to access commands for keys 16-21 and key 27,. There is no need to press the...
CD, press the play key. after inserting 22-26. the CD into the drawer. 16 Pwr (Power) Key 24 Stop Key Use this key to turn the KAV-250cd on and Use this key to terminate CD playback. off. 25 Open Key 17 Mode Key...
Batteries should be replaced when functions from the remote control become intermittent. The KA V-3OOcd remote uses two AAA size 1.5 volt batteries. 1. Remove the backplate to expose the bat- teries. 2. Remove the old batteries. Page 10 of 16 English KRELL® KAV-250cd...
Note joints. Both the balanced and single-ended out- puts can be used to simultaneously feed dif- 1. Plug the KAV-250cd into a standard ferent systems. wall AC receptacle. The stand-by led will illuminate. 2. Connect the KAV-250cd output to the appropriate preamplifier input.
Use this key to delete the last entry select- automatically clear a programmed sequence, ed in a programmed sequence. press the pwr key (16) to turn the KAV-250cd off. Note Track Forward, Track Back, Repeat, and Pause function normally within a program- med sequence.
Krell’s warranty because of reg- the warranty, Krell ® will repair it at no cost to ulations within a specific country. Please the owner, except as set forth in this warran- check with your distributor for a complete ty.
(R/A number) and shipping address or unauthorized modification. from the Krell ® Service Department. In the event that Krell ® receives a product for ¯ Insure and accept all liability for loss or warranty service which has been modified in any way without Krell ®...
Krell ® Industries, Inc. KAV-250cd 45 Connair Road Front Loading Orange, CT 06477-3650 USA Compact Disc Player TEL 203-799-9954, FAX 203-799-9796 E-MAIL krell @ krellonline.com WEB SITE www.krellonline.com Specifications DIGITAL AUDIO OUTPUT 1 S/PDIF via RCA connector FREQUENCY RESPONSE REMOTE CONTROL 20 Hz-20 kHz +0.0,-0.35 dB...
Need help?
Do you have a question about the KAV-250cd and is the answer not in the manual?
Questions and answers