Listen To The Ipod; Models Of Ipods/Iphones That Can Be Connected To This Unit; Playing Music - Kenwood KDC-BT73DAB Instruction Manual

6. Listen to the iPod

6-1. Models of iPods/iPhones that
can be connected to this unit
Made for
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (2nd generation)
• iPod nano (1st generation)
• iPod with video
• iPod classic
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• For information on the compatibility with iPod/
iPhone software, visit www.kenwood.com/cs/ce/
ipod/.
• Types of available control vary depending on the
type of connected iPod. Visit
cs/ce/ipod/ for further details.
• The word "iPod" appearing in this manual indicates
the iPod or the iPhone connected with the iPod
connection cable (optional accessory).
• Refer to the web site for connectable iPods and iPod
connection cables.
www.kenwood.com/cs/ce/ipod/
Notes
• If you start playback after connecting the iPod, the music
that was playing on the iPod is played first.
In this case, "RESUMING" appears without displaying a folder
name, etc. Changing the browse item will display a correct
title, etc.
• You cannot operate the iPod if "KENWOOD" or "ä" appears
on the iPod.
26
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
www.kenwood.com/

6-2. Playing music

Playing a iPod
Connect the iPod to the USB terminal using the
KCA-iP102 (optional accessory).
[1]
Front USB terminal
[2]
Rear USB terminal
You can connect the iPod to either one of the USB
terminals provided at the front and rear of this unit.
If you connect a device to the USB terminal
provided at the rear, the "REAR USB" indicator stays
lit.
When it is connected, the source is switched
automatically and playback starts.
Selecting a song
Press [E] or [F] button.
Fast-forwarding or fast-backwarding a song
Press and hold [E] or [F].
Pause and play a song
Press and hold [1/6].
Removing iPod
Switch the source to a device other than iPod
and Aha Radio, and then remove the iPod.
Data contained in the iPod may be damaged
if you remove it when it is used as the active
source.
When playback of iPod touch or iPhone does not start
• If an unsupported application has started when connecting
iPod touch or iPhone, "APP & iPod Mode" appears and
sometimes playback does not starts. In this case, APP &
iPod Mode is set to "OFF". Refer to
setting> (page 30).
<6-9. App & iPod mode