1 Camera bottom case
2 Tilt adjustment bracket and
thumbnuts, notches(X2)
Routine Maintenance
* The dome cover is an optical part. Use a soft, dry cloth to remove any fingerprints or
dust.
* Clean the camera housing with a soft, dry cloth. For more stubborn stains, use a
cloth dampened with a small quantity of neutral detergent, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or
Caution
thinners to avoid damaging the surface finish.
Connector Pin Definition
3 Loosen the screw to take off camera
housing
4 Dome cover
Return to factory default by pressing button
for 5 seconds
System re-start
7