Possible.programming.errors; Update Required; Non-Stock Condition - Edge Products CS User Manual

I N T E R N E T
P o s s i b l e P r o g r a m m i n g E r r o r s
Updat e R e q u i re d
Fusion is designed to help the development team at Edge Products
support new vehicle calibrations.
When you connect your device to the vehicle, the first step it takes
is identifying your vehicle's stock file. If the stock file isn't currently
supported the device will display a screen alerting you that the stock
file is not yet supported, and prompt you to press a button/touch the
screen in order to read and save the stock file. Once the device has
saved the stock calibration, it will prompt you to connect the device
to Fusion. Fusion will ask you if you want to upload your vehicle's
stock files to our server. Choosing yes will upload the files to the
server, and alert the development team. This will help the devel-
opment team at Edge Products provide support for your vehicle's
calibration as quickly as possible.
Non -S t o c k c o n di t i on
During programming, the device will read the stock file on your
vehicle and compare it to a corresponding stock file that has been
verified by Edge Products. If there is a mismatch the device will alert
you, and display this message:
" Non-stock condition detected. This is most likely because your vehicle has
been programmed with a competitive product. It is recommended that you
return your vehicle to a stock condition with the product that changed it.
Alternatively, you can plug your device into the internet update system and it
will load the necessary files onto your device to return your vehicle to stock. "
If you don't have the competitive product that programmed your
truck, connect the device to Fusion where you'll be prompted to
download the correct stock files. Once downloaded, simply connect
the device to your vehicle, and the device will program the verified
stock files to your vehicle.
55
U P D A T E S
U S E R G U I D E
I N T E R N E T
U S E R G U I D E
U P D A T E S
55