Pair Your Iphone; Bluetooth Functions & Controls - iSimple blustream Owner's Manual

4. Pair Your Phone
To use the iPhone with the ISBT21 you must first pair it with the
Bluetooth module. Enter your iPhone's Bluetooth menu by going to
Settings>General>Bluetooth and search for a new device. It should
discover the ISBT21 named "PHONEKIT". If prompted for a PIN code
enter 0000, otherwise just select "Pair".
If your iPhone can not find the "PHONEKIT" when you perform a
Bluetooth device search, then follow these steps to use the ISBT21 to
pair to your iPhone:
1. Ensure the radio is in Bluetooth mode by pressing the AUX or SIRIUS
button repeatedly (Must press SR then use the SR123 icon on
navigation radios) until BT is displayed.
2. Enter menu by pressing PRESET 6. "Settings" will be displayed.
3. Press PRESET 6 to select "Settings".
4. Press the SEEK>> button until "BT Search" is displayed. Press
PRESET 6 to select "BT Search".
5. After the search finishes, scroll through the list of devices using the
SEEK>> button until you see your iPhone
6. Press PRESET 6 to select your iPhone
7. If prompted for a PIN code enter 0000, otherwise just select "Pair".
8. Your iPhone should now be paired
Selecting Bluetooth Mode
Press the AUX or SIRIUS button repeatedly (Must press SR then use the
SR123 icon on navigation radios) until BT is displayed.
When you press the AUX or SIRIUS button, you will see the
corresponding SAT mode (for example SAT 1), a slight delay, and then
the current GateWay mode will be displayed (HD Radio/iPod/BT/AUX 1).
5. Bluetooth Functions & Controls
IMPORTANT NOTE: The radio MUST be in Satellite mode or a
PXAMG source in order for the ISBT21 to function. If you switch to
AM, FM or CD mode the ISBT21 will automatically disconnect from
your phone and you must use the handset.
1. Answer/End Call - Allows you to make, receive & end phone calls
directly from the factory radio. Press PRESET 1 to answer/end a call.
5