Page 26
HELPFUL HINTS REPLACING THREAD SPOOLS When replacing thread spools, the following steps may be helpful for quick changeover. 1. Cut off existing threads near the spools. Tie the cut ends thread from new spools as illustrated (seamen’s knot). 2. Raise presser foot. 3.
Page 36
NARROW AND ROLLED HEM, PICOT STITCH Narrow and rolled edge is ideal for use on thin materials such as georgette crepe, crepe de chine, silk etc. Also, picot stitch can be produced particularly when sewing on fine ‘scarflike’ materials. In view of the nature of these hems, they are unsuitable for use on hard’...
Page 46
SETTING DIFFERENTIAL FEED Set by simply moving the differential feed control lever in the direction desired referring to the chart below. The adjustment can be made between 0.7 (negative effect) and 2 (Positive effect). These settings give the best ratio of feeding.
Page 54
DIFFERENTIAL FEED APPLICATIONS 45 DIFFERENTIAL FEED. Please refer to pages 42 Differential feed is designed to minimize puckering and wavering. It is also very effective for gathering. 1. Puckering Puckering tends to occur on woven or sheer fabrics. To obtain pucker-free seams, set the differential feed control dial at less than 1.
Page 63
1\LUtUk PJ UUNIL Z. MUt’(t U I IUNINtL • NED POUR CORDONNET ENROBE E i4ENSATELAS F ARA TRENZAS DECORATIVAS Permet de confectionner un bord avec un cordonnet enrobi Placer le bord de façon a ce que le bord enroulé soit plaç Preparar una pieza de trencilla (cinta plegada sesgada con hors de Ia couture.
Need help?
Do you have a question about the W2500 Superlock and is the answer not in the manual?
Questions and answers