Table of Contents
Advertisement
BATTERY AND POWER MANAGEMENT
This section contains important information about the rechargeable battery and power management
features of your Intuos Pro tablet when used wirelessly. Be sure to review the following sections.
Charging the battery
Battery and wireless connection status
Power saving features
CHARGING THE BATTERY
Fully charge the tablet battery before using Intuos Pro for the first time in wireless mode.
Connect the USB cable between Intuos Pro and a primary USB port located directly on your computer, or to a
powered USB hub.
•
The battery charges whenever the cable is connected and the battery is not fully charged.
•
For everyday use, charge your battery in approximately 4 hours. To fully charge an empty battery it takes
approximately 6 hours. Actual charge time depends upon battery level and tablet use while charging.
•
USB connection deactivates wireless mode.
Important:
•
When charging the battery, always connect the USB cable directly to your computer or to a powered USB
hub. A non-powered hub may not provide enough current to charge the battery, which may affect overall
tablet operation.
•
When your tablet is not connected to your computer via USB cable, you can charge the battery using a
standard wall adapter with 5V output voltage. Quick charging will not work during this process.
For more information, check the product information on the Wacom web site for your region.
Warning: See the Important Product Information guide for safety precautions.
Tips:
•
When charging, be sure that both the battery and the Wacom wireless module are installed in the
tablet.
•
To check the battery charge status, open the Wacom Tablet control panel, click F
select the W
IRELESS
•
Make the most of your wireless time. See
Contents
Index
Contents
Index
tab. See
Battery and wireless connection
Contents
Index
status.
Power saving features
UNCTIONS
and
Battery life
information.
58
58
, and
58
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the PTH-451 and is the answer not in the manual?
Questions and answers
My pen doesnt work, what is it?
If the Wacom PTH-451 pen is not working, possible issues include:
1. You may be using an incompatible pen. Only use the pen that came with the tablet or a Wacom accessory tool specified for Intuos Pro.
2. The pen tip may not have a function assigned. Check the PEN tab in the control panel and ensure a CLICK function is assigned to the tip.
3. The tablet status LED should brighten when the pen tip is pressed. If it does not, hardware may be defective.
4. The pen nib may be worn out. Replace it if it is too short or has a flat point.
5. Make sure settings are adjusted for the specific tool and application being used.
If none of these steps help, the hardware may need testing or service.
This answer is automatically generated