Remote Control - BMW K 1600 GTL Manual

An alarm lasts for approximately
4
26 seconds. While an alarm is in
progress an alarm tone sounds
72
and the turn indicators flash. You
can program the type of alarm
tone.
with central locking
z
You can cancel an alarm at any
time without deactivating the
anti-theft alarm by pressing but-
ton 2 on the remote control.
If an alarm was triggered while
the motorcycle was unattended,
the rider is notified accordingly
by an alarm tone sounding once
when the ignition is switched on.
The anti-theft alarm telltale light
then signals the reason for the
alarm for one minute.
The meanings of the flash codes
are as follows:
Flashes 1x: Motion sensor 1
OE
Flashes 2x: Motion sensor 2
Flashes 3x: Ignition switched
on with unauthorized key
Flashes 4x: Disconnect of the
anti-theft alarm from the mo-
torcycle's battery
Flashes 5x: Motion sensor 3
Deactivation without

remote control

with anti-theft alarm (DWA)
Kill switch in operating position
(run).
Switch on the ignition.
Turn indicators flash once.
Confirmation tone sounds once
(if programmed).
Anti-theft alarm is deactivated.
Deactivation with remote
control
with anti-theft alarm (DWA)
with central locking
Press button 2 on the remote
control once.
See also the other func-
OE
tions of the remote control
for the central locking system.
If you use the remote con-
trol to deactivate the alarm
function and do not follow up
by switching on the ignition, the
alarm function is automatically
reactivated after 30 seconds if
OE
OE