....Speedlite. Turn on the Power Switch....,..,.,.,. Before using the ST-E2, read this instruction manual and the inshuction manuals for your camera and Speedlite. Familiarize yourself with the operation Fully Automatic Wireless F1ash...., 8 of each before using the ST-E2.
Nomenclature Transmitter Battery compartment cover Flash ratio indicator <RATIO> Flash ratio button << > <>> F las h ratio adjustment button Flash ratio control .:=,@ l am p Mounting foot's C hannel Locking pin indicator lock lever <C H. > Channel Contacts Mounting foot button...
Close the cover. ready for wireless flash control. o Slide the cover back to its closed .HOLDt retains the settings made at the <l> position and the ST-E2 will position. not respond to any operation except test transmissions. This prevents the current settings from being altered accidentally.
Page 5
Speedlite may not fire or a standard exposure may not be attained. * lf the flash does not fire, adjust the r When the ST-E2'S pilot lamp lights and the < I > icon lights in the camera slave unit's angle toward the master viewfinder, they indicate that the ST-E2 is ready for remote transmission.
Flash Ratio with E-TTL ll With two slave units, you can vary the flash ratio and shoot with E-TTL ll autoflash. Press the <RATIO> button. < A : B > r 2t r t t .r :2 r t al r The flash ratio control lamp will light.
. The electrical contacts of the ST-E2 and camera are dirty. Clean the contacts. (p.4) . The ST-E2 and slave unit are not set to the same channel. High-Speed Sync Set the ST-E2 and slave unit to the same channel. (p.7, 8) .
Approx. 100 g / 3.5 oz. (excluding battery) This Class B digital apparatus complies with Canadian ICES-003. . All the specifications above are based on Canon,s testing Cet appareil num6rique de la classe B est conforme a la norme NMB-003 du stand.