About the Controls on the air conditioner
The controls will look like one of the following.
Controls
Operation
Off
High
High
Fan
Cool
Low
Fan
Thermostat
5
4
6
3
2
1
9
• FOR NORMAL COOLING
1. Turn the operation switch to the High Cool or the Low Cool setting.
2. Set the thermostat control to the desired temperature mark
starting position). If the room temperature is not satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as appropriate.
• FOR MAXIMUM COOLING
1. Turn the operation switch to the High Cool setting.
2. Set the thermostat control to the largest
• FOR QUIETER OPERATION
1. Turn the operation switch to the Low Cool setting.
2. Set the thermostat control as needed.
• CAUTION
When the air conditioner has been performed its cooling operation and is turned off or set to the
fan position, wait at least 3 minutes before resetting to the cooling operation again.
Off
- Turns air conditioner off.
High Fan - High speed fan operation without cooling.
Low Fan - Low speed fan operation without cooling.
Low
High Cool - Cooling with high speed fan operation.
Cool
Low Cool - Cooling with low speed fan operation.
This automatically controls the temperature of the indoor air.
7
Turn the knob so that arrow points to the larger marks for greater cooling.
Point the arrow to the smaller marks for more moderate cooling.
8
(i.e. the higher number, the greater cooling)
temperature mark.
9
5
(the mid-point is a good
5
Need help?
Do you have a question about the KG5000 and is the answer not in the manual?
Questions and answers