Setting The Current Time (24-Hour Display) - Denon RCD-M37 Owner's Manual

ENGLISH
Setup
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
8, 9
ON/STANDBY <PHONES> SOURCE
[DIMMER]
SOURCE
[CD 1/3]
[VOLUME ]
df
MENU/SET
[CLOCK]

Setting the Current Time
(24-Hour Display)
BUTTON
<BUTTON>
GExampleH Setting the current time to 10:15 am
[BUTTON]
1
ON/STANDBY
Press
<5> <1/3> SDB/TONE
2
[CLOCK]
Press
The current time is displayed.
3
MENU/SET
Press
time setting mode.
The "hours" display flashes.
4
8, 9
Use
5
MENU/SET
Press
The "minutes" display flashes.
<VOLUME>
MENU/SET
6
Use 8, 9
ON/STANDBY
7
MENU/SET
Press
The current time is set, and the normal display reappears.
8, 9
[MUTE]
[ENTER/MEMO]
[o p]
to turn the power on.
.
for over 1 second to set the manual
TIME Adj TIME Adj 0:00 0:00
[o p]
or to set the "hours".
TIME Adj TIME Adj 10:00 10:00
[ENTER/MEMO]
or .
TIME Adj TIME Adj 10:00 10:00
[o p]
or to set the "minutes".
TIME Adj TIME Adj 10:15 10:15
[ENTER/MEMO]
or .
n Checking the current time when the power is on
[CLOCK]
Press .
When pressed again or if a different operation is performed, the
normal display reappears.
n Checking the current time when the power is set
to standby
MENU/SET [CLOCK]
Press or .
Press again to turn off display.
• Displaying the time when the power is set to standby consumes
electricity. To reduce electric consumption, turn the time display off.
• When the function is set to iPod, the current time cannot be set.