Advertisement

ETHOS
Overdrive
Amp
User's Manual
Provided
to you by:
www.customtonesinc.com
Email: rob@customtonesinc.com
Note: Specifications are subject to change without notice
Page 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Overdrive and is the answer not in the manual?

Questions and answers

Summary of Contents for Ethos Overdrive

  • Page 1 ETHOS Overdrive User’s Manual Provided to you by: www.customtonesinc.com Email: rob@customtonesinc.com Note: Specifications are subject to change without notice Page 1...
  • Page 2: Key Features

    ETHOS Overdrive Amp User’s Manual Key Features: Overview: The Ethos Overdrive Amp was inspired by one of the most sought after boutique guitar amplifiers ever • Dual Independent Channels with EQ made. Extensive time and attention to detail were –...
  • Page 3: Specifications

    Activates Boost mode in overdrive channel indicated by annunciation of red LED CHANNEL SELECT Selects between clean and overdrive channel Footswitch indicated by annunciation of red LED for Overdrive and green LED for Clean Note: Specifications are subject to change without notice Page 3...
  • Page 4 ETHOS Overdrive Amp User’s Manual 4.75” Note: Hi-Cut Knob extends 0.75” beyond right hand side of unit. Note: Specifications are subject to change without notice Page 4...
  • Page 5: Typical Applications

    ETHOS Overdrive Amp User’s Manual Typical Applications: Ethos Guitar Guitar GAC ON Ethos Broad Band Guitar Interface Speaker (PC, PA, etc) GAC OFF Ethos Standard Power Guitar Guitar Speaker GAC OFF Ethos Speaker SPEAKER Guitar 8 or 16 GAC OFF...
  • Page 6 Input: 100 – 240VAC, 47 – 63 Hz • Wall Outlet Plug Type: US, 3 prong Note: The Ethos Overdrive Amp must only be powered using the power adapter furnished with the unit. Use of other power adapters can result in poor performance or damage the Ethos Overdrive Amp.
  • Page 7 OD tone stack. Using the Ethos Direct or into a Flat Band Power Amp When you are using the Ethos in a DI application or going into a power amp, turn off the GAC switch. In this application no compensation is required.
  • Page 8 PREAMP OUT to the input of the effect and then connect the output of the effect to the PWR AMP In. What happens when the unit is bypassed? When the unit is bypassed, the input signal is buffered and fed to the power amp. In this mode the Ethos operates as a flat band power amp.

Table of Contents