Connection Of Additional Equipment; Declaration Of Conformity; Troubleshooting - Doro AUB 300I Manual

Message Waiting indicator
Some PBX systems use a function called Message Waiting.
The switch is located behind the battery cover on the underside of the telephone.
The MW function operates differently depending on the PBX in question. Please
contact the system controller for more information. The following four alternatives are
available: +, -, ringer indicator (
used in systems without a telephone exchange (
Connection of additional equipment
On the right side of the telephone there is a socket marked
connecting additional telephone equipment to the same telephone line, e.g. a wireless
telephone, modem, etc.
Declaration of conformity
Doro hereby declares that this product, Doro AUB 300i, conforms with the essential
requirements and other relevant regulations contained in the Directive 1999/5/EC,
2002/95/EC. A copy of the manufacturer's declaration is available at www.doro.com/
dofc

Troubleshooting

Check that the telephone cord is undamaged and properly plugged in.
Disconnect any additional equipment, extension cords and other telephones. If the
problem is resolved, the fault is with other equipment.
Test the equipment on another working line. If the product works, then the fault is
probably with your line. Please inform your local telephone company.
No number shown in display when ringing
- In order for this feature to function, you must subscribe to the Caller ID service
from your network provider.
- If a text message is shown on the display, the call may be an international call (no
data received), or from a private or withheld number.
- It may not be possible to receive Caller ID information if the phone is connected to
a PBX system.
If the telephone still does not work, contact the place of purchase. Don't forget the
receipt or a copy of the invoice.
English
) and high DC voltage (HV). When the telephone is
) should be selected.

. This is used for
8