Table of Contents
Summary of Contents for Northern Industrial Tools 168620
- Page 1 Electric Meat Grinder OWNER’S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #168620...
- Page 2 Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., INC. Product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it.
- Page 3 WARNINGS AND PRECAUTIONS · Always unplug when assembling or disassembling the unit. · Close supervision is necessary when any appliance is used near children. Do not allow children to operate the unit. · When carrying the unit, be sure to hold the Motor Housing with both hands. ·...
- Page 4 CAUTION: A bleaching solution containing chlorine will discolor aluminum surfaces. CAUTION: Do not immerse Motor Housing in water. Wipe the Motor Housing with a damp cloth to clean. CAUTION: Thinners and benzines will crack or change the color of the unit. A little salad oil on the Feed Screw and Cutting Blade after washing and drying will keep them lubricated.
- Page 5 REASSEMBLING FOR KUBBE Step 1. Switch the machine off and unplug. Step 2. Unscrew and remove the Cap. Step 3. Remove the Cutting Plate and Cutting Blade. Step 4. Place Kubbe Attachments A and B on to the Feed Screw shaft together, fitting protrusions in the slots.
- Page 6 INSTALLATION DIAGRAM - 6 -...
- Page 7 PARTS LIST PARTS# DESCRIPTION Quantity Switch Locking Knob Motor Housing Opening Food Pusher Hopper Plate Head Feed Screw Cutting Blade 10-14 Attachments Cutting Plate (fine) Cutting Plate (medium) Cutting Plate (coarse) Kubbe attachment (A) Kubbe attachment (B) Cutters Cord compartment For replacement parts and technical questions, please call 1-800-222-5381.
Need help?
Do you have a question about the 168620 and is the answer not in the manual?
Questions and answers