Blaupunkt TRAVELPILOT FREESTYLER Operating And Installation Manual page 91

The installation menu appears in the display.
3 Mark and confirm the INSTallation TEST menu item.
The installation test menu appears in the display.
Note: The installation test does not need to be carried out in order to
calibrate the device. You can start automatic or manual calibration
right away. The purpose of the test is only to check the connections.
You can test the following device functions and connections:
GPS - Check the GPS antenna
If the system detects that the GPS antenna is connected, OK appears in the
display. If the system receives a signal from one or more satellites, the number
of received satellites and signal strength will appear. Align your antenna so
that both values are at a maximum.
REVERSE - Reversing light connection
When you engage the reverse gear, the arrow display changes from
IGNITion - Positive ignition connection
Switch on the ignition. ON appears alongside IGNITion.
SPEED - Speedometer connection (only TravelPilot E
speed signal "ON")
Move the vehicle a short distance. If the system detects the presence of the
speedometer signal it starts counting the pulses.
4 Press the ESC button = to return to the installation menu.
You can start calibrating the device after the test. There are 2 options available
to you for this.
INTRODUCTION NAVIGATION
,
RADIO CD / MP3
ins=all
INST. TEST
AUTO CALIB
TMC
MAN. CALIB
SPEED
INS=ALL =es=
GPS
REVERSE
TMC
IGNIT.
to .
SPEED 5528
and
CD CHANGER SETUP
NAV
7 35
ON
NAV
91
APPENDIX