Changing the Audio Source with
SRC
You can shift between the connected audio
sources in the following order:
CD ♦ radio ♦ CD
For changing the audio source during CD
operation:
Press the SRC button 7.
The car radio shifts to radio operation.
What to do, if
the control of an integrated CD player sud-
denly fails to operate properly?
Turn the car radio on and off.
The fault may be caused by a voltage drop-
down of the car battery (e.g. when starting it).
CD Changer (Option)
With your car radio you can remote control
the following functions of a Blaupunkt CD
changer (e.g. CDC-M1, -M3, -A03, -F03).
For detailed information about how to opera-
te the CD Changer, please refer to the ope-
rating instructions of your changer.
Playing a CD
For listening to a CD, you will have to switch
to the CD changer:
Press the SRC button 7 DISC and the
number of the current CD is shown on
the display C a
Changing the CD
For playing the next CD, proceed as follows:
Press the rocker switch <</>> E on
the right.
For playing the previous CD:
Press the rocker switch <</>> E on the
left.
Skipping/Repeating a Track
(Cue/Review)
For playing the next title
briefly press the upper part of the ro-
F.
cker switch
/
For playing the previous title
briefly press the lower part of the ro-
F.
cker switch
/
Cue (Fast Forward)
Press the upper part of the rocker
F for longer than one se-
switch
/
cond.
Review (Fast Backward)
Press the lower part of the rocker
F for longer than one se-
switch
/
cond.
Briefly Sampling a Track
CD Scan
Starting from the track currently played you
can briefly sample the following tracks of the
CD for approx. ten seconds each:
Press the Scan knob 1 approx. 1 sec.
The display C a will give you "SCAN".
The next track is played.
If you want to keep on listening to the sam-
pled track:
Briefly press the Scan button 1 once
again for approx. 1 sec.
The Scan function is deactivated and
the song is continued to play.
31
Need help?
Do you have a question about the LONDON RDM 43 and is the answer not in the manual?
Questions and answers