Pro-Form 6.0 Rt Treadmill Manual

English manual

Hide thumbs Also See for 6.0 Rt Treadmill:

User manual (28 pages)

User manual (28 pages)

User manual (28 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the 6.0 Rt Treadmill and is the answer not in the manual?

Questions and answers

Gene Gospodarek

January 25, 2025

the track is stuck in an incline position and the display continues to move through the various speed settings but none of the buttons can be activated. to lower the tack or start and stop any function. while in a programed mode I increased and lowered thespeed and now nothing works

1 comments:

Mr. Anderson

February 10, 2025

To fix a stuck incline on a Pro-Form 6.0 RT Treadmill when the display is unresponsive, follow these steps:

1. Hold down the Stop button and the Speed increase button.
2. Insert the key into the console.
3. Release the Stop button and the Speed increase button.
4. Press the Stop button again.
5. Press the Incline increase or decrease button.

The treadmill will automatically rise to the maximum incline level and then return to the minimum level to recalibrate the incline system. If the incline does not begin calibrating, repeat steps 4 and 5. Once the calibration is complete, remove the key.

This answer is automatically generated

Karen

February 13, 2025

Does Proform 6.0 RT model require user to lubricate the motor belt?

Summary of Contents for Pro-Form 6.0 Rt Treadmill

Page 1 Model No. PFTL39511.4 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.proformservice.com/ registration. CUSTOMER CARE For service at any time, go to www.proformservice.com.
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decals may not be shown at actual size. PROFORM is a registered trademark of ICON IP, Inc.
Page 3: Important Precautions
14. To purchase a surge suppressor, see your 4. The treadmill is intended for home use only. local PROFORM dealer, call the telephone Do not use the treadmill in any commercial, number on the front cover of this manual, or rental, or institutional setting.
Page 4 20. The heart rate monitor is not a medical 24. Never insert any object into any opening on device. Various factors, including the user’’s the treadmill. movement, may affect the accuracy of heart rate readings. The heart rate monitor is 25.
Page 5 STANDARD SERVICE PLANS...
Page 6: Before You Begin
® 6.0 RT manual. To help us assist you, note the product model treadmill. The 6.0 RT treadmill provides an impressive number and serial number before contacting us. The selection of features designed to make your workouts model number and the location of the serial number at home more effective and enjoyable.
Page 7: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
Page 8: Assembly
ASSEMBLY •• To hire a service technician to assemble this prod- •• Left parts are marked ““L”” or ““Left”” and right parts uct in your home, call 1-800-445-2480. are marked ““R”” or ““Right.”” •• Assembly requires two persons. •• To identify small parts, see page 7. ••...
Page 9 3. Locate the Upright Wire (63) bundled between the Base (74) and the Belly Pan (52). Remove all ties securing the Upright Wire. Route the Upright Wire into the Base and out of the indi- cated hole. Press a Base Cap (70) into each side of the Base (74).
Page 10 5. Hold the Right Upright (33) against the Base (74). Be careful not to pinch the Upright Wire (63). Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star Washer (3) into the top hole in the Right Upright (33).
Page 11 8. Remove the four screws (D) from the Left and Right Handrails (59, 64). Discard the screws. 9. Attach the Console Crossbar (61) to the Left and Right Uprights (66, 33) with four #10 x 3/4" Screws (8) and four #10 Star Washers (23). Start all four Screws, and then tighten them.
Page 12 10. With the help of a second person, hold the con- sole assembly near the Right Handrail (64). Connect the Upright Wire (63) to the console Console wire. See the inset drawing. The connectors Assembly should slide together easily and snap into place.
Page 13 12. Attach the Latch Housing (67) to the Left Upright (66) with two #10 x 3/4" Screws (8) ; start both Screws, and then tighten them. Make sure that the large hole in the Latch Housing is on the indicated side. Locate the Latch Pin Assembly (68).
Page 14: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s...
Page 15 CONSOLE DIAGRAM FEATURES OF THE CONSOLE To turn on the power, see page 16. To use the manual mode, see page 16. To use a preset work- The treadmill console offers a selection of features out, see page 18. To use the information mode, designed to make your workouts more effective.
Page 16: To Turn On Power
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
Page 17 4. Change the incline of the treadmill as desired. burned, or the speed of the walking belt. Press the Priority Display button repeatedly until the upper To change the incline of the treadmill, press the display shows the information that you are most Incline increase and decrease buttons or one of interested in viewing.
Page 18: To Use A Preset Workout
HOW TO USE A PRESET WORKOUT programmed for the next segment, the speed and/ or incline setting will  ash in the display to alert you. 1. Insert the key into the console. The treadmill will then automatically adjust to the speed and incline settings for the next segment.
Page 19: Information Mode
THE INFORMATION MODE HOW TO USE THE STEREO SOUND SYSTEM The console features an information mode that keeps To play music or audio books through the console’’s track of treadmill usage information and allows you to speakers, you must connect your MP3 player, CD select a unit of measurement for the console.
Page 20: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL Before folding the treadmill, adjust the incline to Before moving the treadmill, fold it as described at the the lowest position. If you do not do this, you may left.
Page 21: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by follow- c. Remove the key from the console, and then ing the simple steps below. Find the symptom that reinsert it. applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. d.
Page 22 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the speci cations described on page 14. a. If the walking belt is off-center,  rst remove the key and UNPLUG THE POWER CORD.
Page 23: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 24: Part List
PART LIST Model No. PFTL39511.4 R0113A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Walking Platform 3/8" x 3 1/4" Screw Walking Belt 3/8" Star Washer Right Foot Rail #8 x 3/4" Screw Idler Roller 5/16"...
Page 25: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL39511.4 R0113A...
Page 26 EXPLODED DRAWING B Model No. PFTL39511.4 R0113A...
Page 27 EXPLODED DRAWING C Model No. PFTL39511.4 R0113A...
Page 28: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...

This manual is also suitable for:

Pftl39511.4