Inserting The Rack Console; Installing The Cable Management Part - Fujitsu RC25 User Manual

8-2-4. Inserting the Rack Console

(1) Pull out the intermediate members of the slide rails until the members are locked.
(2) Pull out the retainers to the front ends of the rails.
(3) Insert the Rack Console into the slide rails. Push the Rack Console until it locks on the
slide rails.
CAUTION

8-2-5. Installing the Cable Management Part

(1) Secure the rear bracket of the cable management part assembled in "8-2-1. Assembling
the Cable Management Part" (page 5) with the finger screw on the rear protrusions of the
RC25 Rack Mount Kit on the left rear-side rack brace.
Rear bracket

(2) Fix the front bracket to the fitting on the rear of
the Rack Console.
(3) Insert the pin into the hole.
Firmly push the pin until the ball lock is securely
in place.
Make sure, that both inner rail members are inserted in the retainer
properly! Do not hold the handle of the device when you attach the
device. Otherwise, the LCD may open and the device may fall.
Firmly hold the bottom of the device when you carry it.

Ring for
removing the
pin
9
Retainer
Pin for fixing the
cable management
part
Bracket