Table of Contents
Advertisement
V-CAN SPORTS 10660 El Poche St., El Monte, CA 91733
T 1-888-680-8226 F (323) 221-2800
BLINC™ Bluetooth Compatible Helmet
Generation II Headset Manual (User Guide)
Bluetooth Introduction
This BLINC™ headset is a portable headset solution based on Bluetooth wireless
technology. Bluetooth wireless technology is a short-range radio communication
technology intended to replace the cables connecting electronic devices. The
technology uses a globally available frequency range intended to ensure
communication compatibility worldwide.
You can connect your BLINC™ headset to your mobile phone or any device with
Bluetooth wireless technology that supports the BLINC™ Headset profile or the
Handsfree profile. When the BLINC™ headset is connected to your mobile phone,
you can handle incoming and outgoing calls, listen to music, and adjust the volume,
using the buttons on the BLINC™ headset. It can connect to mobiles, music players
and GPS systems that are Bluetooth enabled.
The inbuilt BLINC™ Bluetooth Headset in the motorcycle helmet is made up of a
discrete battery unit、control buttons microphone and earphone.
c
1
Advertisement
Table of Contents
Related Manuals for Blinc Bluetooth Compatible Helmet
Summary of Contents for Blinc Bluetooth Compatible Helmet
- Page 1 You can connect your BLINC™ headset to your mobile phone or any device with Bluetooth wireless technology that supports the BLINC™ Headset profile or the Handsfree profile. When the BLINC™ headset is connected to your mobile phone, you can handle incoming and outgoing calls, listen to music, and adjust the volume, using the buttons on the BLINC™...
- Page 2 Cont r ol But t ons Fi gur e 1 Caution Listening at full volume to music or voice through a BLINC™ headset may damage your hearing. Although the external areas of the helmet are waterproof, you are advised to ensure the inside elements of the Bluetooth device are not exposed to water or any other foreign substance.
-
Page 3: Getting Started
BLINC™ headset for the first time. Connect the charger to the BLINC™ headset and to the mains. The charging time is about 4 hours. During charging, the indicator shows a steady red light. When the battery is fully charged, the indicator red light will switches off. - Page 4 Push Here Press and hold the Call Handling Button (MFB) for approximately 2~4 seconds until you hear a short low tone followed by a short high tone. The BLINC™ headset indicator light flashes blue. When turned on, the BLINC™ headset automatically establishes hands-free phone and streaming music connections with the last connected Bluetooth devices (phone and/or music devices).
- Page 5 To turn the BLINC™ headset off Press and hold the Call Handling Button (MFB) for approximately 5 seconds until you hear a short high tone followed by a short low tone. The BLINC™ headset indicator light switches off. Seeking Mode Press and hold “Multifunction button”...
- Page 6 Activate Bluetooth Choose Setting Function Bluetooth Function...
- Page 7 Before selecting the “Add new device”, you need to press the “Multifunction button” on BLINC™ Bluetooth Helmet until the blue and red indicator lights start blinking. Click “Add new device” Select “Blue Helmet” PASSWORD IS “OOOO” < Follow Further Instructions per your phone’s manual>...
- Page 8 ...
- Page 9 Pairing BLINC™ Bluetooth Helmets Before pairing, make sure there is no Bluetooth device working in your area. Driver (BLUE ONLY !!!) (Turn on the Bluetooth) Press and hold “Multifunction button” (MFB) 3 seconds on Driver Role Bluetooth Helmet. (Around 3~4 seconds, the blue light will flash) Passenger ...
- Page 10 Passenger (Blinking) Release the Button on Passenger Role after blue and red LED lights begin to flash. Driver (Accept the Pairing) Next, turn the MFB clockwise Driver Role Bluetooth Helmet until the blue and red indicator lights flash. Driver (Blinking) Release the Button on Driver Role.
- Page 11 Your BLINC™ headset allows you to listen to music from your Bluetooth streaming music source. Note: If listening to music from your mobile, when placing or receiving calls, music playing from the mobile phone is automatically paused.
- Page 12 Note: this function is valid only if your phone supports Hands-Free Profile. Last Number Redial If BLINC™ headset is idle, press and hold the Call Handling Button (MFB) until you hear a long beep, then release.
-
Page 13: Adjusting The Volume
BLINC™ headset. Transferring sound from phone to BLINC™ headset If you make a call using your phone, you can transfer the sound to the BLINC™ headset if the BLINC™ headset is on; press the Call Handling Button (MFB). - Page 14 Replace battery If you need to replace battery, please turn off the BLINC™ Bluetooth Headset first, and then open the Shell’s cover. As Figure 5 shown, follow the instructions direction to push the Clasp handle，you can open the cover to expose the battery in Shell as Figure 6 shown.
- Page 15 Note 1: Unless authorized to do so, you should not attempt to remove the Bluetooth Control Unit. BLINC™ Note 2: When the battery is inserted on the wrong side, the lights will not blink. Re-Set your battery properly and check for lights on the MFB.
- Page 16 DISCLAIMER: MANUFACTURER IS NOT LIABLE FOR INJURIES DUE TO MISHANDLING OF THE DEVICE ATTACH AND FASTEN THE HELMET PROPERLY AND RESPECT SPEED LIMITS & WEATHER WARNINGS FOR SAFETY REASONS, THE DEVICE IS PROGRAMMED TO HANDLE CALLS UP TO A SPEED OF 60 MILES PER HOUR ONLY...
Need help?
Do you have a question about the Bluetooth Compatible Helmet and is the answer not in the manual?
Questions and answers