Page 4
English Setting up [2.1] Remove headset from packaging and untie headset cord. [2.2] Adjust boom arm for left/right ear wearing. Warning: Do not force boom arm beyond built-in stops. [2.3] Put on headset and position ear cushion(s) on ear(s). Note: With monaural headsets, position stabilizer above ear.
Page 6
English Maintenance The headband and boom arm may be wiped with a dry or slightly damp Note: Avoid cloth. getting moisture or liquids into The cords may be dry-dusted as any button required. sockets, recep- tors or other The foam ear cushion(s) may be openings.
English Materials and allergies The headband is made of stain- less steel, which does not have a nickel-coated surface. The stainless steel alloy has been tested for nickel release in accordance with the European standard EN 1811:1998. According to EU Directive 94/27/EF, the nickel release must be below 0,50µgram/cm /week.
Need help?
Do you have a question about the GN 2000 and is the answer not in the manual?
Questions and answers