Page 3
3. ‘Ready’ Indicator Dimensions L=362mm 4. Flash Power Control W=145mm 5. Test/Open Flash H=145mm 6. Modelling Power Control Weight 3.4Kg Due to our policy of constant product improvement Bowens International reserve the right to change equipment specifications without notice. Fig.2...
Page 5
• Care must be exercised when handling equipment that has been in use. The reflector and front end of the unit can become Very Hot. • Due to the high voltage / high energy used in Esprit 2 500, all servicing must be carried out by an authorised Service Centre.
Page 7
• The flash power output is variable over five f-stops from full to one thirty-second (1/32) • A range of reflectors is available for the Esprit 2 500 unit. To fit, slide the neck of the power. The full stored energy of 500-Watt Seconds (joules) gives a guide number of reflector over the front of the unit.
Need help?
Do you have a question about the ESPRIT 2 500 and is the answer not in the manual?
Questions and answers