SPECIFICATIONS SR-50 Single Channel Receiver Temperature Range ....0 to +50 degrees C Supply Voltage ....2-3 Volts, (2) AA Batteries Quiescent Current.
Belt Clip The belt clip supplied is detachable by spreading the wire apart at the tops and removing one side of the clip from the case and then the other. HEADPHONE JACK Telex CHANNEL VOLUME OFF/ON CONTROL...
OPERATION General The Telex SR-50 single channel receiver operates on 17 factory preset channels in the 72 to 76 MHz frequency band and is designed to operate with the Telex TW-6, AAT-2, PST-16, ST-200, PST-170, and ST-300 transmitters. To operate the SR-50 Receiver: 1.
BATTERY ORIENTATION BATTERY COMPARTMENT COVER The SR-50 Receiver uses two (2) AA batteries. When the batteries are low, the sound will be distorted. Replace weak batteries with two fresh AA batteries, and position them in the battery compartment as illustrated.
FCC INFORMATION TO THE USER The Telex Model SR-50 is authorized under Part 15 of the Federal Communication’s rules. Any changes or modifica- tions made to this receiver could void the user’s authority to operate the equipment. OPTIONAL ACCESSORIES Description Catalog No.
Page 8
Material 36 months, workmanship 36 months. Micro- phones, earphones, neckloops, cables & connectors are warranted for ninety days. Telex will, at its option, repair or replace free of charge such defective products subject to the following conditions: Delivery of the product or parts postage prepaid to the Telex dealer, authorized ser- vice facility or factory.
Page 10
TELEX COMMUNICATIONS, INC. 12000 Portland Ave. So., Burnsville MN 55337 U.S.A. PN 804054 June 2004 Made in U.S.A.
Need help?
Do you have a question about the SoundMate SR-50 and is the answer not in the manual?
Questions and answers