Catalytic Converters; Seats - Yamaha FJR1300AS Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Catalytic converters

This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. Make sure that the exhaust
3 system has cooled down before do-
ing any maintenance work.
CAUTION:
The following precautions must be
observed to prevent a fire hazard or
other damages.
G Use only unleaded gasoline.
The use of leaded gasoline will
cause unrepairable damage to
the catalytic converter.
G
Never park the vehicle near pos-
sible fire hazards such as grass
or other materials that easily
burn.
G
Do not allow the engine to idle
too long.
EAU13442

Seats

Passenger seat
EWA10860
To remove the passenger seat
1. Insert the key into the passenger
seat lock, and then turn it counter-
clockwise.
ECA10700
1. Passenger seat lock
2. Unlock.
2. Lift the front of the passenger seat
and pull it forward.
EAU39492 To install the passenger seat
1. Insert the projections on the rear of
1. Projection
2. Seat holder
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat.
2. Push the rider seat lock lever, lo-
3-22
the passenger seat into the seat
holders as shown, and then push
the front of the seat down to lock it
in place.
cated under the back of the rider
seat, to the left as shown, and then
pull the seat off.