Related Manuals for Sena SM10
Summary of Contents for Sena SM10
- Page 1 User's Guide SM10 Dual Stream Bluetooth ® Stereo Transmitter www.senabluetooth.com...
- Page 2 Sena Technologies, Inc reserves the right to make any changes and improvements to its product without providing prior notice. Sena™ is a trademark of Sena Technologies, Inc. or its subsidiaries in the USA and other countries. SMH10™, SMH5™, SPH10™, SPH10S™, SPH10H™, SR10™, SM10™...
-
Page 3: Table Of Contents
4.1. Power ON & OFF 4.2 Battery Check 4.3 Charging 4.4 Low Battery Warning 5. PAIRING THE SM10 WITH OTHER BLUETOOTH DEVICES 5.1 Bluetooth pairing with the first headset 5.2 Bluetooth pairing with the second headset 6. USING THE SM10 6.1 Connections... - Page 4 6.5 Fault Reset 7. QUICK REFERENCE BATTERY INFORMATION MAINTENANCE AND CARE DISPOSAL CERTIFICATION AND SAFETY APPROVALS • FCC Compliance Statement • FCC RF Exposure Statement • FCC Caution • CE Declaration of Conformity • Industry Canada Statement • Bluetooth License WAIVER AND GENERAL RELEASE •...
-
Page 5: Introduction
Bluetooth dual stream stereo transmitter based on Bluetooth 2.1+EDR technology. You can connect various audio devices such as mobile phone or MP3 player by using the SM10. It also supports onboard audio systems of specific brands by using optional audio cables. Along with the dual streaming feature of... - Page 6 SM10 features: • Dual audio streams for two Bluetooth headsets • Auxiliary stereo input for GPS or radar/laser detector • Water resistant for use in inclement weather • Optional interface cable for onboard motorcycle audio systems of Harley-Davidson and Honda Gold Wing •...
-
Page 7: Package Contents
2. PACKAGE CONTENTS • Main Unit Blue LED Red LED AUX Port for auxiliary audio input AUDIO IN Port for main stereo audio input DC Power Charging & Firmware Upgrade Port Charging LED Pairing Button Power Switch... - Page 8 • USB Power & Data Cable • Cigarette Charger • Audio Cable 3.5mm 4 pole • Audio Cable 3.5mm 3 pole • Handlebar Mounting Kit • Mounting Cradle...
-
Page 9: Installing The Sm10
3. INSTALLING THE SM10 3.1 Installing on the Handle Bar 1. Attach the mounting kit on the back of the SM10 along the guide rail. 2. Place the main unit on the handle bar, wind the rubber band around the handle bar, and hang it on the hook. -
Page 10: Powering On/Off And Charging
4. POWERING ON/OFF AND CHARGING 4.1 Power ON & OFF To power on the SM10, slide the Power Switch to on. The Blue and Red LEDs will turn on. To power off, slide the Power Switch to off. 4.2 Battery Check You can check the battery level when the SM10 is powering on. -
Page 11: Low Battery Warning
4.4 Low Battery Warning When the battery is running low, the Red and Blue LED will flash. -
Page 12: Pairing The Sm10 With Other Bluetooth Devices
5. PAIRING THE SM10 WITH OTHER BLUETOOTH DEVICES The SM10 must be paired with a Bluetooth headset to stream audio from the non-Bluetooth audio source. If you want to stream audio to two separate headsets, you need to perform a pairing for both headsets. Pairing to the first headset will be... -
Page 13: Bluetooth Pairing With The Second Headset
5. The SM10 will detect the Bluetooth headset nearby and connection will be made accordingly. 6. If the first headset is connected, the Blue LED will slowly flash. 5.2 Bluetooth pairing with the second headset 1. Turn on the second Bluetooth headset. (Refer to the headset user guide). -
Page 14: Using The Sm10
6. USING THE SM10 6.1 Connections The SM10 has one AUDIO IN Port and one AUX Port for wired connection with other devices. • AUDIO IN: Main stereo audio input Two types of stereo audio cables are included in the package, 3.5mm 4-pole stereo audio cable and 3-pole stereo cable. -
Page 15: Using With A Headset
SM10. The SM10 tries to connect the paired Bluetooth headset again. Note: The SM10 does not allow all control functions of your audio device over Bluetooth AVRCP. In this case, the play/pause functions are controlled from the audio device itself with the forward/backward tracking functions... -
Page 16: Mute Or Un-Mute Aux
6.5 Fault Reset If the SM10 is not working properly or is in a faulty status for any reason, you may reset by pushing the small reset button at the back of the SM10 Main Unit. By using a paper clip or a pencil tip, lightly press and hold the reset button for 1 second. -
Page 17: Quick Reference
7. QUICK REFERENCE • Buttons Button Description Duration Power Switch ON Power-on 1 sec Solid blue & solid red Power Switch OFF Power-off 1 sec LED off Fisrst headset 5 sec Blue rapid flashing pairing Second headset 9 sec Red rapid flashing pairing Pairing Button Rapid flashing on both blue... -
Page 18: Battery Information
The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge the battery only with Sena approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. -
Page 19: Maintenance And Care
MAINTENANCE AND CARE The product should be treated with care and the following suggestions will help you protect your warranty coverage. 1. Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. 2. -
Page 20: Disposal
DISPOSAL The crossed-out wheel bin symbol on the product, literature, or packaging reminds you that all electrical and electronic products, batteries, and accumulators must be taken to separate collection at the end of their working life. This requirement applies to the European Union and other locations where separate collection systems are available. -
Page 21: Certification And Safety Approvals
CERTIFICATION AND SAFETY APPROVALS • FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: - This device may not cause harmful interference, and - This device must accept any interference received, including interference that may cause undesired operation. -
Page 22: Fcc Rf Exposure Statement
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -
Page 23: Ce Declaration Of Conformity
• CE Declaration of Conformity This product is CE marked according to the provisions of the R&TTE Directive (99/5/EC). Hereby, Sena declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.senabluetooth.com. -
Page 24: Bluetooth License
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. Other trademarks and trade names are those of their respective owners The product is compliant with and adopts ®... -
Page 25: Waiver And General Release
Directors, Affiliates, Parent Company, Representatives, Agents, Contractors, Sponsors, Employees, Suppliers and Resellers (jointly referred to as the “Company” or “Sena”) strongly advises you to take all necessary precautions and remain alert to the traffic, weather and road conditions if you choose to use the Product, including all derivative models irrespective of its commercial name or branding (the “Device”), and stop your... - Page 26 (see below), you are irrevocably releasing, indemnifying from any liability, loss, claim and expense (including attorneys fees) and holding Sena harmless for any bodily injuries, harm or death as well as losses or damages in goods, to any Vehicles including your own, or to any property or asset that...
- Page 27 Sena hereby notifies you that using this Device may also be in contravention to local, federal, state or national laws or regulations, and that any use of the Device is entirely at your sole risk and responsibility. 1. You, your heirs, legal representatives, successors or...
- Page 28 confirm that you are at least eighteen (18) years of age and that you have been advised of the risks associated with the use of the Device. You further confirm that you will not consume any alcohol that may affect your alertness or any mind-altering substance, and will not carry, use or consume these substances before or during the use of the Device.
-
Page 29: Two-Year Limited Warranty
This warranty is limited to the repair and/or replacement, at Sena’s discretion, of defective or non-conforming Product, and Sena shall not be responsible for the failure of the Product to perform specified functions, or any other nonconformance caused by or attributable to: (a) any misapplication or misuse of the Product;... -
Page 30: Limitation Of Liability
Sena. Limited warranty service may be obtained by delivering the Product to Sena or to the international distributor it was purchased through and providing proof of purchase or receipt date. Customer agrees to insure the Product or assume the risk of loss or damage in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent. -
Page 31: Return For Full Refund
OF FURNISHING OF EQUIPMENT, PARTS OR SERVICES HEREUNDER OR THE PERFORMANCE, USE OR INABILITY TO USE THE SAME, EVEN IF SENA OR ITS DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT. -
Page 32: Warning
WARNING Sena informs that using this device in public traffic may not be authorized by the law. Please check your local law and use this device only out of public traffic such as private properties or closed circuits. Sena denies any liability should you choose not... - Page 33 1.0.0 User's Guide for Firmware v1.0 www.senabluetooth.com...
Need help?
Do you have a question about the SM10 and is the answer not in the manual?
Questions and answers