Monitor Configuration; Reinstalling Drivers - ATI Technologies ALL-IN-WONDER X800 Series Installation And Setup User's Manual

Monitor Configuration

Once the drivers and software have been installed, you can configure your
monitor.
To configure your primary display
1
Navigate to the Control Panel and choose Display or right-click on
the desktop and choose Properties .
2
Choose the Settings tab and select a screen resolution and color
depth that best suit your requirements and your monitor's
performance.
3
Click the Advanced button and select the Monitor tab.
4
Choose a refresh rate from the drop-down list.
WARNING
may damage your monitor. Consult your monitor's documentation if
necessary.
5
Click OK until you return to the desktop.

Reinstalling Drivers

The software installation procedure detailed in this chapter describes how
to install the drivers for your graphics card after you have installed a new
card for the first time and have rebooted your computer.
If you are installing the graphics card drivers in a special working scenario,
such as if you have reinstalled your operating system or want to perform a
manual reinstallation.
To reinstall drivers using the ATISETUP utility
You can always install the drivers using the ATISETUP utility on the ATI
Installation CD-ROM. The ATISETUP utility will start automatically if
you insert the ATI Installation CD-ROM into your CD-ROM drive after the
operating system has started. If your CD-ROM auto-run is not enabled or
the ATISETUP utility does not start automatically, perform the following
actions:
1
Click the Start button in the task bar.
2
Select Run .
- Choosing a refresh rate unsupported by your monitor
Monitor Configuration 27