Cleaning The Control Panel; Cleaning The Oven; Removing The Oven Door - Beko CSM 87300 G User Manual

Cleaning the control panel
Clean the control panel and knobs with a damp
cloth and wipe them dry.
• Do not remove the control buttons/knobs to
I
lean the control panel.
Control panel may get damaged!
Cleaning the oven
To clean the side wall
1 . Remove the front section of the side rack by
pulling it in the opposite direction of the side
wall.
2. Remove the side rack completely by pulling
it towards
Catalytic walls
Side walls or just back wall of oven interior may
be covered with catalytic enamel.
The catalytic walls of the oven must not be
cleaned. The porous surface of the walls is self-
cleaning by absorbing and converting spitting fat
(steam and carbon dioxide).
Clean oven door
Don't use any harsh abrasive cleaners or
harp metal scrapers for cleaning the oven
,...._IOOOr.
They could scratch the surface and
destroy the glass.
28/EN
Removing the oven door
1. Open the front door (1).
2. Open the clips at the hinge housing (2) on
the right and left hand sides of the front door
by pressing them down as illustrated in the
2
3
fi ure.
Front door
Hinge
Oven
3. Move the front door to half-way.
4. Remove the front door by pulling it upwards
to release it from the ri ht and left hin es.
teps carried out during removing process
hould be performed in reverse order to
install the door. Do not forget to close the
clips at the hinge housing when reinstalling
the door.