CLUTCH UNIT
The clutch plates should not be burnt or scored.
Check the thickness of the clutch lining plate.
Thickness of new plate:
3 mm (0.118 in.).
Wear limit
2,9 mm (0.114 in.)
Check the distortion of each plate (both lined and unlined) by
resting on a flat surface; use a feeler gauge.
Wear limit: 0,2 mm (0.00078 in.).
CLUTCH HOUSING-FRICTION DISC CLEARANCE
STANDARD
MAX-WEAR LIMIT
0.30-0,50 mm
0,6 mm
0.024 in.
0.012-0.020 in.
75