Fitting the trimmer guard and
trimmer head
(325C)
Guard
•
Fit the guard as shown in the diagram. Tighten securely.
Trimmer head
•
Fit the dust cup on the shaft. The nut must be completely
covered by the dust cup.
•
Hold the dust cup with a spanner to prevent the shaft from
rotating.
•
Screw the trimmer head onto the shaft.
14 –
English
ASSEMBLY
Fitting the trimmer guard and
trimmer head
(325Cx)
•
Fit the guard as shown in the diagram. Tighten securely.
•
Insert the locking pin into the hole to lock the axle.
•
Screw the trimmer head onto the shaft.