3. LCD SCREEN a. RX icon. Displayed when receiving a signal. b. TX icon. Displayed when transmitting a signal. c. Displays the current VOLUME LEVEL. d. CTCSS code. Changes from 1 to 38 as selected by user. e. Displayed during the CHANNEL SCAN mode. f.
CTCSS code enabled. The Twintalker 3000 has 38 CTCSS codes available. 1. Press the MENU button ( ) twice, the CTCSS code will flash 2.
Page 5
5.4. Button Lock Press and hold the MENU button ( ) for 5 seconds to activate or deactivate the BUTTON LOCK mode. The BUTTON LOCK icon is displayed on the LCD Screen.Press and hold the MENU button ( ) again to deactivate BUTTON LOCK 5.5.
5.8. Using rechargeable batteries. Important: Do not charge this unit using an AC/DC ADAPTER with regular “AAA” alkaline batteries installed. Only use the optional AC/DC ADAPTER with “AAA” rechargeable batteries (not included). To use the PMR with an AC/DC ADAPTER and rechargeable batteries do the following: 1.
7. SAFETY INSTRUCTIONS 7.1. Damage antenna. Do not use any communicator that has a damaged Antenna. If a damaged antenna comes in contact with the skin, a minor burn may result. 7.2. Batteries. As batteries can cause property damage and/or bodily injury such as burns if conductive material such as jewelry, keys or beaded chains touches exposed terminals.
During the time of the warranty Topcom will repair free of charge any defects caused by material or manufacturing faults. Topcom will at its own discretion fulfil its warranty obligations by either repairing or exchanging the faulty equipment.
Need help?
Do you have a question about the TwinTalker 3000 and is the answer not in the manual?
Questions and answers