Multi-Zone Operations; Turning The Power On And Off; Selecting The Input Source; Adjusting The Volume - Denon AVR-1709 Owner's Manual

Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SOURCE SELECT>
<ZONE2 ON/OFF>
<ZONE2 / REC SELECT>
[Front]
[SOURCE
SELECT]
[VOLUME]
[MUTING]
[SOURCE
CONTROL 2]
[SOURCE
CONTROL 1]
(Main remote control unit)
[ZONE2 OFF]
[SOURCE SELECT]
(Sub remote control unit)

Multi-zone Operations

BUTTON

Turning the Power On and Off

<BUTTON>
[BUTTON]
GOperation on the main unitH
<ZONE2 ON/OFF>
Press
GOperation on the remote control unitH
[ZONE2 ON]
Press
When using ZONE2, it is possible to turn the power for the MAIN
ZONE only on or off by pressing

Selecting the Input Source

GOperation on the main unitH
<ZONE2 / REC SELECT>
Press
GOperation on the remote control unitH
[Rear]
[SOURCE CONTROL 1]
Set
[ZONE2 OFF]
"ZONE2" (main remote control unit).
[SOURCE SELECT]
Press
[ZONE2 ON]
[SOURCE
SELECT]

Adjusting the Volume

[SOURCE CONTROL 1]
Set
"ZONE2" (main remote control unit).
[VOLUME]
Press .
[Variable range]
The ZONE2 volume can be adjusted only when "ZONE2" is selected
at "System Setup" – "Option Setup" – "Amp Assign" (vpage 28).
[ZONE2 ON]
[VOLUME]
[MUTING]
for the zone to be operated.
[ZONE2 OFF]
or .
[MAIN ON] [MAIN OFF]
or .
<SOURCE SELECT>
, then turn .
[SOURCE CONTROL 2]
to "AUDIO" and
.
[SOURCE CONTROL 2]
to "AUDIO" and
– – – –70dB ~ –40dB ~ +18dB

Turning off the Sound Temporarily

[SOURCE CONTROL 1]
Set to "AUDIO" and
"ZONE2" (main remote control unit).
[MUTING]
Press .
b To cancel, either adjust the volume or press
The setting is canceled when the zone's power is turned off.
The source selected for ZONE2 is also output from the recording
output connectors.
NOTE
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot be played in multi-zone.
to
to
ENGLISH
[SOURCE CONTROL 2]
to
[MUTING]
again.