Cooling Mode; Heating Mode; Timer Mode - DeLonghi ONE On-Off 7K Operating And Installation Manual

COOLING MODE

The cooling function allows the air conditioner to be started
and used as a producer of cool air.
To activate the cooling function (COOL), press the MODE
button until the symbol ( ) appears on the display.
To change the temperature value, use the (TEMP UP and
TEMP DN). buttons. Each time the buttons are pressed the
set temperature value increases or decreases by 1°C.

HEATING MODE

The heating function allows the air conditioner to be started
and used as a producer of hot air.
To activate the heating function (HEAT), press the MODE
button until the symbol ( ) appears on the display.
To change the temperature value, use the (TEMP UP e TEMP
DN). buttons. Each time the buttons are pressed the set
temperature value increases or decreases by 1°C.
The appliance is fitted with a Hot Start function, which de-
lays appliance start-up for a few seconds to ensure an im-
mediate output of hot air.

TIMER MODE

Before setting the timer, ensure that the time on the
remote control is set correctly. If it is not, consult the
instructions given on page 6.
Automatic switching-on
To set the automatic switching-on of the air conditioner,
proceed as follows:
- With the appliance switched off, press the button TIM-
ER ON ( ).
- Set the automatic switching-on time using the
button.
- Press the TIMER ON button within 10 seconds to con-
firm otherwise the function will exit from time setting.
Note: to cancel the function setting, press the TIMER ON
button again.
Automatic switching-off
To set the automatic switching-off time, proceed as follows:
- Press the TIMER OFF ( ) button.
- Set the automatic switching-off time using the
button.
- Press the TIMER OFF button within 10 seconds to con-
firm, otherwise the function will exit from time setting.
Note: to cancel the function setting, press the TIMER OFF
button again.
SINGLE SPLIT
MODE
-
ON OFF
MODE
-
ON OFF
ON OFF
!
and
ON OFF
!
and
Note: it is also possible to set the appliance switch-
ing-on and switching-off time so as to define a spe-
cific duration of operation.
Note: the appliance will start in the mode of operation that
was selected before switching off.
USER
INTELLIGENT REMOTE CONTROL
21
° C
+
USER
INTELLIGENT REMOTE CONTROL
23
°C
+
USER
B-LOGIC
B Logic
INTELLIGENT REMOTE CONTROL
88:88 ON TIMER
PM
AM OFF TIMER
F-LOGIC
F Logic
INTELLIGENT REMOTE CONTROL
ENGLISH
9