Ad-HOc MOde OPerAtIOn SWItcHIng tO dIFFerent POWer MOdeS AdjuStIng VOluMe PlAyIng MuSIc tHrOugH WI-FI PlAyIng MuSIc tHrOugH bluetOOtH PlAyIng MuSIc tHrOugH AIrPlAy® HArMAn KArdOn reMOte HArMAn KArdOn AurA led IndIcAtIOn tAble HArMAn KArdOn AurA led rIng PAttern IndIcAtIOn trOubleSHOOtIng SPecIFIcAtIOnS...
Harman Kardon remote app simplifies the setup and lets you stream all your audio content. With its simple setup and quality sound, the Harman Kardon Aura is an essential audio component for every house.
Ac power cord to the rear panel of Harman Kardon Aura. ON/OFF: this button turns the Harman Kardon Aura On and OFF. Press and hold this Source Connections button for more than 2.5 seconds to put the unit into Standby mode. Press the button the speaker offers the following source connection options: again to bring it back to Operational mode.
Wi-Fi settings with the Harman Kardon Aura and it will be connected to your Wi-Fi network. this takes at least 40 seconds. Once the Harman Kardon Aura is connected to the network, the Wi-Fi led will light constantly and a sound prompt can be heard.
Wi-Fi Settings page on your Mac, Pc or Phone and connect to the network with the name HK_Aura*****. the power button on the side panel of the HK Aura allows you to set the wireless speaker to any of the following power modes: this may take around 40 seconds depending on your device.
• MAc or Pc running a compatible version of itunes located on the system. the Harman Kardon Aura will appear as a Wi-Fi speaker in the AirPlay menu named • Short press - Increase/decrease volume by 1 step HK AurA WF.
Aura Harman Kardon Aura led ring Pattern Indication Harman Kardon Aura LED Ring Pattern Indication Status Pattern booting up from Standby Mode two Spot clockwise booting complete Fully On Operational Mode Fully On Sleep Mode Fully On, but in lower brightness.
Aura troubleshooting Troubleshooting If your Harman Kardon Aura is not performing the way you think it should, check if the problem is covered in this section before calling your dealer or contacting a Harman Kardon representative. Problems Solutions there is no sound coming from the Harman Kardon Aura •...
Aura Specifications Specifications Power supply 19Vdc, 3A Power consumption 57W maximum, <0.5W eco-standby mode transducers 4.5”(112mm) for Woofer, 1.5”(40mm) for tweeter Amplifier power 1x30W + 2x15W Frequency response 50Hz - 20KHz Signal-to-noise ratio 80db at 30W(woofer), 80db @15W(tweeter) bluetooth transmitter frequency range 2.402 - 2.480gHz...
Need help?
Do you have a question about the Aura and is the answer not in the manual?
Questions and answers