Related Manuals for Garden Oasis HIGHLAND 10X12 GAZEBO
Summary of Contents for Garden Oasis HIGHLAND 10X12 GAZEBO
- Page 1 ITEM: 11776 OWNER＇ S KSN: 0-03888686-7 UPC code: 749241312052 MANUAL HIGHLAND 10X12 GAZEBO Date of purchase: _____/ _____/ _____...
- Page 2 HIGHLAND 10X12 GAZEBO ASSEMBLY INSTRUCTION Tips: Warning: Keep All Flame And Heat Sources Away From This Tent Fabric. This Tent Is Made With Fabric That Meets CPAI-84 Specifications For Flame Resistance. It Is Not Fire Proof. The Fabric Will Burn If Left In Continuous Contact With Any Flame Source.
- Page 3 Preparation: Before beginning assembly, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: Approx. 2 hours Tools required for Assembly (not included): Ladder （5ft).
- Page 5 Step 1 A. Insert Base Cap (#3) into post (#1). Then fit base flange (#2) underneath post (#1). B. Insert screw 1 (#13) through post (#1) and secure the base flange (#2). Slide down base cap (#3) in to place as shown. C.
- Page 6 Step 2 A. Insert crossbar B (#5) into crossbar A (#4), connect crossbar B (#5) and crossbar A (#4) by using screw 1 (#13). B. Repeat step A for balance 1 crossbar.
- Page 7 Step 3 A. Insert crossbar D (#7) into crossbar C (#6), connect crossbar D (#7) and crossbar C (#6) by using screw 1 (#13). B. Repeat step A for balance 1 crossbar.
- Page 8 Step 4 Place the crossbar sets from steps 2 and 3 as depicted in the illustration below.
- Page 9 Step 5 A. Place post (#1) as depicted in the illustration below. B. Insert screws 2 (#14) through posts (#1). Secure the set onto crossbars B & C (#5 & #6) as figure below. C. Insertc screws 2 (#14) through posts (#1). Secure the set onto crossbars A & D (#4 & #7) as figure below.
- Page 10 Step 6 A. Insert 2-Tier roof tubes (#8) into roof connector (#12). B. Insert corner roof tubes (#9) into 2-Tier roof tubes (#9). C. Then, secure corner roof tubes (#9) onto posts (#1) by using screws 3 (#15) and nuts (#16) as figure below.
- Page 11 Step 7 A. Insert roof tubes (#10, #11) into roof connector (#12). B. Then, secure roof tubes (#10, #11) onto crossbar by using screws 3 (#15) and nuts (#16) as figure below.
- Page 12 Step 8 A. Position one person on 5 ft ladder, following ladder’s safety recommendations to avoid danger, so that person can reach top of gazebo. B. Place fabric cover (#19) on top but do not tighten. C. Place air vent cover (#18) on top, then secure finial (#18). D.
- Page 13 USER MAINTENANCE INSTRUCTIONS STORAGE: In preparation for winter storage, remove leaves and dirt, dry and wrap in polybag to prevent rusting. Store in dry place. Treat frame periodically with liquid wax for maximum protection against UV rays and moisture. Fabric covers clean with a soft brush and lukewarm water, rinse thoroughly. Dry completely.
Need help?
Do you have a question about the HIGHLAND 10X12 GAZEBO and is the answer not in the manual?
Questions and answers