Appendix D. Usb 2.0 Drivers Installation For Windows - Abit AT7 User Manual

USB 2.0 Drivers Installation for Windows
Appendix D. USB 2.0 Drivers Installation for
After you've installed VIA chipset drivers, you will need to install the USB 2.0 drivers. Step by step
instructions on how to do this are found in the following section.
Details of the Windows
problems with Windows
2000 user's manual or other databases provided by Microsoft
Insert the AT7 series CD into your CD-ROM drive, and it should execute the program automatically. If
not, you can go to the CD location and execute the execution file at the main directory of the CD. After it
has been executed you will see the screen below.
Step 1: Move the cursor to "USB 2.0 Driver"
and click on it. You will go to the next screen.
Step 2: The "InstallShield Wizard" shows up,
and it will go to the next screen for a while.
®
2000
®
Windows
®
2000 operating system will not be mentioned in this manual. If you have any
®
2000 installation, operations, or settings, please refer to your Windows
2000
Note
®
Corporation.
Step 3: You will now see the welcome screen
and its dialogue box. Click "Next>" to go on.
Step 4: Choose "Install USB Driver", then click
"Next>" to go on.
D-1
®
User's Manual