Changing The Display For Incoming Calls; Changing The Display For The Standby Mode - Sanyo SCP-8100 User Manual

Changing the Display for Incoming Calls

1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Incoming Calls and press
5. Select the menu under Incoming Calls and press
6. Highlight your desired colour or image and press
Get New: start up the Browser and you can select an item to
download. (See page 74.)
Pictures: to set a picture in Picture Wallet. (See page 98.)
To see a display preview, press
step 6 above. Then press
Sub LCD
clamshell to confirm the image on the Sub LCD.
To adjust the position of the image, use your Navigation key
during step 6 above.
.
.
.
.
.
Preview
(right softkey) during
(right softkey) or close the

Changing the Display for the Standby Mode

1. Press
to access the main menu.
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Standby Display and press
5. Select your desired item and press
Screen Saver selects the screen saver to display.
Calendar displays the Calendar.
Time (Large) displays the local time in a large, simple format.
World Clock displays the time of the selected country along
with the local time. You can scroll the World Clock list and
change the country by pressing the left or right Navigation
key. When applicable, the
(right softkey) can be used to change between summer and
standard time.
Tip:
You can also display the World Clock from Tools/Extras menu.
See "Using the World Clock" on page 71.
Default sets this feature to default.
6. After following each system prompt or confirming the
preview display, press
Tip:
In a no-service area, Screen Saver, Calendar, Time (Large), or World
Clock cannot be shown on the Standby display.
.
.
.
.
(left softkey)/
Summer Standard
to save the setting.