Obihai OBi100 Administration Manual
  1. Manuals
  2. Brands
  3. Obihai Manuals
  4. Adapter
  5. OBi100
  6. Administration manual

Obihai OBi100 Administration Manual

Obi1 series, obi2 series, obi3 series
Hide thumbs Also See for OBi100:
Table of Contents

Advertisement

Quick Links

See also: Admin Manual
Obihai Technology, Inc.
OBi Device Administration Guide
Models:
OBi1 Series – OBi100, OBi110
OBi2 Series – OBi200, OBi202
OBi3 Series – OBi300, OBi302
Version 01092013 – September 2013

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OBi100 and is the answer not in the manual?

Questions and answers

Related Manuals for Obihai OBi100

Summary of Contents for Obihai OBi100

  • Page 1 Obihai Technology, Inc. OBi Device Administration Guide Models: OBi1 Series – OBi100, OBi110 OBi2 Series – OBi200, OBi202 OBi3 Series – OBi300, OBi302 Version 01092013 – September 2013...
  • Page 2 99 OB PEED IALING OF NDPOINTS OR UMBERS PHONE 1/2 COLLABORATIVE FEATURES (OBI202 AND OBI302 ONLY) STAR CODE FEATURES CALL FORWARD NUMBERS CONFIGURATION AND MANAGEMENT INTERFACES OF THE OBI DEVICE -IVR-B ELEPHONE ASED OCAL ONFIGURATION Copyright 2010-2013 Obihai Technology, Inc.
  • Page 3 ACKUP ESTORE ESET ONFIGURATION TO ACTORY EFAULT OUCH ASSIVE CALE EMOTE ROVISIONING ITSP QUICK START SETUP WIZARD (OBI100 AND OBI110) ITSP QUICK START SETUP WIZARD (OBI202, OBI302) STATUS PAGES YSTEM TATUS LAN S 202/OB TATUS ONLY TATUS ISTORY SERVICES, PHONE & LINE STATUS...

  • Page 4: Table Of Contents

    RING PROFILE A & B FEATURES OF THE OBI DEVICE STAR CODE PROFILE FEATURES OF THE OBI DEVICE (VAR) CRIPT ARIABLES (ACT) CRIPT CTIONS CRIPT ORMAT CRIPT XAMPLES USER SETTINGS FEATURES OF THE OBI DEVICE Copyright 2010-2013 Obihai Technology, Inc.
  • Page 5 ULES AND LEMENTS ATCHING GAINST ULTIPLE ULES IN IGIT NVOKE ECOND ONE IN IGIT HANGE NTER DIGIT IMER YNAMICALLY FTER ARTIAL ATCH EFINED IGIT EFINED IGIT IALING SPECIFICATIONS & ENVIRONMENTAL CHARACTERISTICS OF THE OBI DEVICE Copyright 2010-2013 Obihai Technology, Inc.

  • Page 6: Notational Conventions

    What’s more is the application of the functional configuration is controlled by device configuration files tightly integrated with the settings configured by the OBiTALK portal and cloud-based applications managed by Obihai which make possible the device’s “plug-n-play” operation.
  • Page 7 LINE port. As such, references in this document that describe configuration or behavior of the LINE port or “Li” interface apply to the OBi110 or devices with an OBiLINE USB to FXO adapter attached. OBiLINE USB to FXO Adapter Copyright 2010-2013 Obihai Technology, Inc.
  • Page 8 OBiON for iPhone, iPad, iPod touch & Android Devices: An application for iPhone, iPad, iPod touch and Android devices which makes possible placing and receiving calls to/from other OBi endpoints. OBiAPP for PC: An application for a PC that facilitates placing and receiving calls to/from other OBi endpoints. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 9  OBiTALK Managed VoIP Network for OBi Endpoint Devices & Applications  High Quality Voice Encoding Using G.711, G.726, G.729 and iLBC (OBi200/OBi202/OBi300/OBi302 only) Algorithms  Recursive Digit Maps & Associated Call Routing (Outbound, Inbound) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 10 Physical Interfaces of the OBi Device Overview of the OBi Device Physical Interfaces Top Views of the OBi100, OBi110, OBi200/300 and OBi202/OBi302 LED Order (Left to Right): Power Status – Internet Port Activity – LAN Port Activity (OBi202) – PHONE Status – LINE Status (OBi110) Rear Views of the OBi100, OBi110, OBi200/300 and OBi202/OBi302 Port Order (L-to-R): LINE Port (OBi110) –...
  • Page 11 PSTN LINE, indicates OBiTALK service is available. Solid Green OBi200/OBi300: If the Primary Line is SP1/SP2/OBiTALK, indicates the corresponding primary service is available. Flashing Green The phone is in use. Fast Flashing Green The phone is ringing. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 12 Fast Flashing Green The line is ringing. LED Pattern When Hardware Reset Button Is Pressed for Ten (10) Seconds: Power LED blinks green slowly for 5 seconds and fast for 4 seconds preceding unit reboot. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 13 PHONE port option UseForPagingOnly. In this configuration, the phone port is expected to be “off-hook” all the time. The OBi will automatically answer incoming calls. It will not accept call-waiting. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 14 OBiBT USB adapter accessory. OBiBlueTooth 2 is available only on devices with two OBiBT USB dongles attached. Trunk Group 2 is not available as a choice of primary line on OBi100/OBi110. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 15 *.jpg; *.mp3  Write Enable: This specifies whether the user can upload, delete, copy, cut and paste files or create new directories on the USB device. Note: By default, read/file-download access is granted to all users. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 16 If the receiving port and protocol matches a port forwarding rule, forward the packet to the LAN IP address according to that rule.  If a DMZ host is configured, forward the packet to that LAN IP address.  Queue the packet for internal processing. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 17 LAN side clients indicate the desired priority class of their outbound packets to the router by marking the DiffServ/TOS bits of their packets accordingly. See the QoS Settings section for more details. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 18 Note that the total guaranteed bandwidth allocated to all the four priority classes is equal to the total available uplink bandwidth, which must be specified correctly in the UpStreamBandwidth parameter in the QoS settings for QoS to work properly. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 19 When VLAN is enabled, packets sent to the OBi not belonging to the same VLAN are dropped, while packets sent by the OBi are tagged with the configured VLAN ID. The packets switched directly between the external ports, on the other hand, are not modified by the OBi. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 20: Call Forwarding

    OBi, dial *60. You will be prompted to enter the number to which the calls will be forwarded. Dial the number plus the # key and a confirmation tone will be heard. To disable Call Forward on Busy, dial *61. A confirmation tone will be heard Copyright 2010-2013 Obihai Technology, Inc.

  • Page 21: Call Waiting

    You can continue to talk together, as this is now a 3-way call, or you can hang up the phone and the other two parties will remain connected. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 22: Do Not Disturb

    Incoming calls will be presented with a busy signal. To use Anonymous Call Block, from the phone attached to the OBi, dial *77. To cancel Anonymous Call Block, from the phone attached to the OBi, dial *87. Do Not Disturb Copyright 2010-2013 Obihai Technology, Inc.
  • Page 23 Each port may also have a different primary line assigned; the default however is to set the prmary line to SP1 for both phone ports. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 24 *28, Make OBiBT Bluetooth Adapter discoverable for the next 120s (OBI202 only) and set it as OBiBlueTooth 1 *29, Make OBiBT Bluetooth Adapter discoverable for the next 120s (OBI202 only) and set it as OBiBlueTooth 2 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 25 Speed Dials that are set-up on the OBiTALK portal will always overwrite anything set-up via the phone connected to the OBi. Note: You must attach one and only one OBiBT dongle to the unit when using this star code; otherwise the operation will fail. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 26 The number to forward to must be in the final form that is acceptable by the service provider. OBi will not apply any Digit Map or Call Routing Rules on it. Examples: SP1(14089991234), PP1(ob200333456) You may also set the call forward number to a phone port (ph, ph1 or ph2) or the AA (aa) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 27 Your current IVR password value will Press 2 to set the default value. be read back to you and you will be Press 0 to repeat the information. given the option to change the value. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 28 Firmware Version Press 0 to repeat the information. The current value of the firmware Press # to enter another configuration version will be read back. selection. IVR Password Press 1 to enter a new value. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 29 (Always Press “#” After Entering Selection) Press 1 to enter a new value. DHCP Configuration Press 2 to set the default value. The current value of the DHCP configuration will be read back. Press 0 to repeat the information. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 30 Note: Always Press “#” After Entering Selection Enable Web Management Access from Press 1 to enter a new value. WAN port Press 2 to set the default value. The current value will be read back. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 31 Press 1 to enter a new value. DHCP Configuration Press 2 to set the default value. The current value of the DHCP Press 0 to repeat the information. configuration will be read back. Press # to enter another configuration selection. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 32 (Always Press “#” After Entering Selection) Press 1 to enter a new value. Enable Service Provider One (SP1) Press 2 to set the default value. The current value will be read back. Press 0 to repeat the information. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 33 Press 1 to enter a new value. Press 2 to set the default value. SP1 Call Forward on Busy – Enable / Press 0 to repeat the information. Disable Press # to enter another configuration selection. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 34 SP2 User ID Press 0 to repeat the information. The current value will be read back. Press # to enter another configuration selection. SP2 Block Caller ID Enable Press 1 to enter a new value. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 35 SP2 Call Forward on No Answer – Press 0 to repeat the information. Enable / Disable Press # to enter another configuration selection. Press 1 to enter a new value. SP2 Call Forward on No Answer Copyright 2010-2013 Obihai Technology, Inc.
  • Page 36 Number Press 2 to set the default value. Press 0 to repeat the information. Press # to enter another configuration selection. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 37 Press 0 to repeat the information. Press # to enter another configuration selection. Press 1 to enter a new value. OBiTALK Call Forward on Busy – Enable / Disable Press 2 to set the default value. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 38 (Always Press “#” After Entering Selection) Press 1 to enter a new value. Press 2 to set the default value. Enable / Disable Auto Attendant. Press 0 to repeat the information. Press # to enter another configuration selection. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 39 Press 1 to enter a new value. Press 2 to set the default value. Ring Thru Delay Press 0 to repeat the information. The current value will be read back. Press # to enter another configuration selection. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 40 Furthermore you can enter a text description for each recorded prompt as a reminder of the contents of the prompt (under the Voice Services - Auto Attendant configuration page). Copyright 2010-2013 Obihai Technology, Inc.
  • Page 41 In fact, the WAN side access to the web server is disabled by default. You can enable this option on the device web page (from the LAN side), or by using the device configuration IVR (* * * 0 option 30) from an attached telephone. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 42 Required” icon appears indicating the OBi device Configuration Reset, the requires a reboot to invoke one or more Reboot button does not parameter modifications. need to be pressed. The OBi will reboot automatically when the “Reset” button is selected. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 43: Updating Firmware

    If the new firmware is upgraded successfully, the OBi device will reboot automatically to start running the new firmware. Otherwise the page will show an error message explaining why upgrade has failed. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 44 When restoring the configuration to a previous backup copy, you will need to specify the backup file you want to restore to by selecting the “Browse” button in the Restore Configuration section of the web page. Then, select the “Restore” button to start the process. The OBi device will automatically reboot, after the restoration is complete. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 45 Please contact sales@obihai.com for information regarding the capability, process and practice of using OBi ZT Provisioning. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 46 Setup Wizard page will show the same values. The illustration below depicts the OBi device web page Setup Wizard. ITSP Quick Start Setup Parameter Guide (OBi100 and OBi110): Parameter Description...
  • Page 47 Attendant PrimaryLine when dialing out via the AA. Mirrors PSTN Line Auto Attendant::PrimaryLine Digit map controlling the transmission of dialed digit information. Mirrors Service Providers – ITSP DigitMap (1xxxxxxxxxx|<1>[2-9]xxxxxxxxx |011xx.|xx.) ITSP Profile A – General::DigitMap Copyright 2010-2013 Obihai Technology, Inc.
  • Page 48 Mirrors ITSP InboundCallRoute Voice Services – SP1 Service::X_InboundCallRoute Routing rule for inbound calls on this OBiTALK trunk. Mirrors InboundCallRoute OBiTALK Service::InboundCallRoute Routing rule for inbound calls on this POTS-line trunk. Mirrors InboundCallRoute LINE Port::InboundCallRoute Copyright 2010-2013 Obihai Technology, Inc.
  • Page 49 The Setup Wizard page for OBi202 and OBi302 is very similar to that of the OBi1xx, with a few additions to cover the additional ISTP profiles and SP services. The illustration below depicts the OBi202 device web page Setup Wizard. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 50 Host name or IP address of the SIP proxy server. Mirrors ITSP X SIPProxyServer Service Providers – ITSP Profile X – SIP::ProxyServer Destination port to connect to the SIP server. ITSP X Mirrors 5060 SIPProxyServerPort Service Providers – ITSP Profile X – Copyright 2010-2013 Obihai Technology, Inc.
  • Page 51 AOR (Address of Record) or Public Address when SPn URI sending outbound SIP Requests (such as REGISTER and INVITE); otherwise device forms its AOR in the normal way. See Copyright 2010-2013 Obihai Technology, Inc.
  • Page 52 Voice Services – SPn Service::URI Routing rule for inbound calls on this trunk. Mirrors SPn InboundCallRoute ph,ph2 Voice Services – SPn Service::X_InboundCallRoute Routing rule for inbound calls on this trunk. OBiTALK Mirrors ph,ph2 InboundCallRoute OBiTALK Service::InboundCallRoute Copyright 2010-2013 Obihai Technology, Inc.

  • Page 53: Status Pages

    The following series of illustrations are taken from screen shots of the System Status page of an OBi202. The System Status page is divided into several sections: WAN Status, WiFi Status, Product Information, OBiBlueTooth Service Status, SP1 – SP4 Service Status, OBiTALK Service Status, and OBiPLUS Service Status. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 54 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 55 Copyright 2010-2013 Obihai Technology, Inc.

  • Page 56: Product Information

    Incoming Call: BT detected an incoming call, but ringing has not started yet Ring <Caller-ID>: Mobile phone is ringing. <Caller-ID> is the caller’s number Outgoing Call: Mobile phone is making a call that is not answered yet Copyright 2010-2013 Obihai Technology, Inc.
  • Page 57 MAC address, an IP address, and the lease expiration time (in seconds) Below is a screen shot of a typical LAN Status page. This page is available when the OBi202/OBi302 is working in router mode. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 58 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 59 Remove: This button is available for all calls. Pressing this button will end that call. Record: This button is available for calls involving the Phone port only. Pressing this button allows you to record the current conversation in an audio (.au) file Copyright 2010-2013 Obihai Technology, Inc.

  • Page 60: Call History

    Call History The OBi Call History page shows the last 400 calls made with the OBi (200 calls only on the OBi100/OBi110). Detailed call information is available, including what terminals were involved, the name (if available) of the Peer endpoints making the call and the direction / path the call took.
  • Page 61 Services, Phone & Line Status Statistics relevant to SPn can be found on the SPn Stats page (where n = 1, 2, 3, 4). Copyright 2010-2013 Obihai Technology, Inc.
  • Page 62 RTP payload bytes received for this line PacketsLost Number of RTP packets lost on this line Overruns Number of times receive jitter buffer overrun on this line Underruns Number of times receive jitter buffer underrun on this line Copyright 2010-2013 Obihai Technology, Inc.
  • Page 63 Port status, such as on-hook, off-hook, ringing LoopCurrent Loop current in mA VBAT PHONE port battery voltage in volts. Not applicable for LINE port TipRingVoltage Sensed differential Tip/Ring voltage in volts LastCallerInfo Caller ID of previous call Copyright 2010-2013 Obihai Technology, Inc.
  • Page 64 Router Configuration (OBi202, OBi302 Only) WAN Settings Below is a screen shot of the WAN Settings device web page. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 65 PPPoE: IP address default gateway, etc. are acquired by PPPoE Protocol (OBi202, OBi302 only) IPAddress The IP address to assign to the device when AddressingType is set to Static SubnetMask The subnet mask to use when AddressingType is set to Static Copyright 2010-2013 Obihai Technology, Inc.
  • Page 66 Local time zone. Available choices are: GMT-08:00 GMT-12:00(Int'l Dateline West) GMT-11:00(Samoa) GMT-10:00(Hawaii) GMT-09:00(Alaska) GMT-08:00(Pacific Time) GMT-07:00(Mountain Time) GMT-06:00(Central Time) GMT-05:00(Eastern Time) GMT-04:00(Atlantic Time) GMT-03:30(Newfoundland) GMT-03:00(Buenos Aires,Greenland) GMT-02:00(Mid-Atlantic) GMT-01:00 GMT+00:00(London,Lisbon) GMT+01:00(Rome,Paris,Madrid) GMT+02:00(Athens,Cairo) GMT+03:00(Moscow,Baghdad) GMT+04:00(Abu Dhabi) GMT+04:30(Kabul) GMT+05:00(Islamabad,Karachi) GMT+05:30(New Delhi) GMT+05:45(Kathmandu) GMT+06:00 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 67 - port is a port number (such as 5060) - pri is the priority. Valid value is 0(highest) – 65535(lowest) - wt is the weight. Valid value is 0(lowest) – 65535(highest) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 68 DNS Records, the device will attempt to resolve it using external DNS queries. Any change applied to local DNS Record needs reboot in order to take effect. LAN Settings Below is a screen shot of the LAN Settings device web page. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 69 The current IP address of the router on the LAN side (read only). It is blank if CurrentRouterIPAddress OBi is operating in bridge mode. OperationMode The Networking Operation Mode for the device. It can be one of the following Router Copyright 2010-2013 Obihai Technology, Inc.
  • Page 70 SubnetMask, a red exclamation mark (!) will be shown next to the value on the OBi device web page. AddressLeaseTime IP address lease time in minutes 1440 LocalDomainName Local Domain Name for the LAN Copyright 2010-2013 Obihai Technology, Inc.
  • Page 71 An optional name for easy identification of the client Client MAC address in the format "xx:xx:xx:xx:xx:xx" (where each x is a hex ClientMACAddress digit that can be in the upper or lower case) ReservedIPAddress The IP address to reserve for this client Copyright 2010-2013 Obihai Technology, Inc.

  • Page 72: Firewall And Dmz

    VPNPassThrough otherwise all VPN traffic are blocked. This setting takes effect only if firewall is enabled; otherwise this feature is enabled DMZ Settings Enable Enable DMZ Service HostIPAddress The IP address of the DMZ server Copyright 2010-2013 Obihai Technology, Inc.

  • Page 73: Port Forwarding

    Starting port number of the forwarded port range Ending port number of the forwarded port range. If it is the same as EndingPort StartingPort, only the one port equal to the StartingPort will be forwarded Copyright 2010-2013 Obihai Technology, Inc.
  • Page 74 Differentiated Service Code Point (DSCP) in their IP headers. The 64 possible DSCP codes (0 – 63) can be mapped into one of the four priority classes using the configurable DSCP to Priority Class Mapping table. Below is a screen shot of the QoS Settings web page. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 75 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 76 The guaranteed uplink bandwidth allocation weight for High High Priority class traffic. It must be a value between 1 and 10 The guaranteed uplink bandwidth allocation weight for Medium Medium Priority class traffic. It must be a value between 1 and 10 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 77 Ethernet interface only, unless a) the WAN (Ethernet) interface and OBiWiFi are on different subnet and b) the destination address is on the same subnet as OBiWiFi. If the OBi is set to function as a LAN switch rather than a router, OBiWiFi is disabled internally. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 78 WiFi Settings A screenshot of the WiFi Settings device page is shown below. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 79 10 HEX digits, 26 HEX digits, 5 ASCII characters, or 13 ASCII characters. The HEX digits can be upper or lower case SecurityEnabled This is a read only parameter. It indicates if the AP has security enabled or not Copyright 2010-2013 Obihai Technology, Inc.
  • Page 80 “Add a Network” link. The “Manage Networks” link takes you back to the WiFi Settings device page, whereas the “Scan For Networks” link reloads this page in order to rescan for the access points in the neighbourhood. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 81: Network Settings

    System Management Features of the OBi Device Network Settings This section applies to OBi100/OBi110 only. For OBi2 Series and OBi3 Series models, please refer to the section WAN Settings. Network Settings Parameter Guide: Default Parameter Description Setting Internet Settings The method used for assigning IP address, subnet mask, default gateway, etc., to the device.
  • Page 82 GMT+01:00(Rome,Paris,Madrid) GMT+02:00(Athens,Cairo) GMT+03:00(Moscow,Baghdad) GMT+04:00(Abu Dhabi) GMT+04:30(Kabul) GMT+05:00(Islamabad,Karachi) GMT+05:30(New Delhi) GMT+05:45(Kathmandu) GMT+06:00 GMT+07:00(Bangkok,Jakarta) GMT+08:00(Beijing,HK,Singapore) GMT+09:00(Tokyo,Seoul) GMT+10:00(Sydney,Guam) GMT+11:00(Solomon Is.) GMT+12:00(Fiji,Auckland) DaylightSavingTimeEnable Enable daylight saving time on the unit DaylightSavingTimeStart Daylight Saving Time Start Date. Format: month/day/weekday/hh:mm::ss, 3/8/7/2 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 83 (5060 for SIP, 80 for HTTP, etc.) . The enclosing curly braces { } are also optional if there is only one R; or if there is no comma used inside the R. Examples: _sip._udp+obihai.com=abc,xyz,pqr:5080,{mmm,2},{super.abc.com.} Copyright 2010-2013 Obihai Technology, Inc.
  • Page 84 DNS Records, the device will attempt to resolve it using external DNS queries. Any change applied to local DNS Record needs reboot in order to take effect. 32 Local DNS Records (numbered 1 – 10 pictured here) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 85 Periodically = Check for f/w upgrade from FirmwareURL on system start, and then periodically Method Disabled at the interval specified in the Interval paramter Note: First f/w upgrade check on system start will be performed after a random delay of 0-30s Copyright 2010-2013 Obihai Technology, Inc.
  • Page 86 DnsLookupType A Record Only - Try Both Note: Option not available on OBi100/OBi110 Control whether to add a standard prefix to the domain name when looking up a SRV Record. For HTTP and HTTPS, the prefix to add is “_http._tcp.”. For TFTP, the prefix to add is “_tfto._udp.”...
  • Page 87 DnsLookupType A Record Only - Try Both Note: Option not available on OBi100/OBi110 Control whether to add a standard prefix to the domain name when looking up a SRV Record. For HTTP and HTTPS, the prefix to add is “_http._tcp.”. For TFTP, the prefix to add is “_tfto._udp.”...
  • Page 88 DnsLookupType A Record Only - Try Both Note: Option not available on OBi100/OBi110 Control whether to add a standard prefix to the domain name when looking up a SRV Record. For HTTP and HTTPS, the prefix to add is “_http._tcp.”. For TFTP, the prefix to add is “_tfto._udp.”...
  • Page 89 $MACRO Expansion Supported by the OBi Device Macro Name Description Where It Can Be Used Device MAC address, such as 9CADEF000000 MACC Device MAC address with colon, such as 9C:AD:EF:00:00:00 Device MAC address lower case, with colon, such as 9c:ad:ef:00:00:00 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 90 GPRMn n=0– Value Auto Provisioning::GPRMn Auto Provisioning::ConfigURL, Auto Firmware Update::FirmwareURL TPRMn n=0-3 Value Auto Provisioning::TPRMn Auto Provisioning::ConfigURL, Auto Firmware Update::FirmwareURL UDMn, n=0-3 Value of User Define Macro n::Value The value of User Define Macro n::ExpandIn Copyright 2010-2013 Obihai Technology, Inc.

  • Page 91: Device Administration

    Port Syslog Server Port Number Level Syslog Message Level A string of text no longer than 32 characters to prepend every syslog message sent out by this unit. Note: Option not available on OBi100/OBi110 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 92 (firmware or configuration file) by the device via HTTP must be completed within this limit or the device will abort and conclude that the operation has failed for the reason of “taking too long to complete” Copyright 2010-2013 Obihai Technology, Inc.

  • Page 93: Sip Service Provider Features Of The Obi Device

    The following section describes the SIP Service Provider features of the OBi device. Up to four SIP accounts (two only on OBi1 Series – OBi100 and OBi110), or SIP Trunks, can be configured on the OBi. For the purposed of this document and elsewhere on OBi device web page, documentation and the OBiTALK portal, the term ITSP is used to describe the logical entity providing the SIP Trunk service to the OBi.

  • Page 94: Sip R Egistration

    When sending out SIP requests to the server, the device looks up the IP address of the server using standard DNS query if the server is specified as a domain name instead of an IP address. If Outbound Proxy Server is configured, it is used instead Copyright 2010-2013 Obihai Technology, Inc.

  • Page 95: Nat T Raversal C Onsiderations

    Subsequently, the device maintains registration with the primary server the usual way. However, if no working server is found after traversing the entire list, device takes a short break and repeats the search in the same order. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 96: Sip P Rivacy

    RPID, and also sets the display name in the FROM and RPID headers to “Anonymous” for backward compatibility. The device will not insert PAID in outbound INVITE requests. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 97: Stun And Ice

    When the device receives this, it will look for a ring tone name or call-waiting tone name in the ring profile that matches the Alert-Info URI. Ring tone names are compared case- insensitively. If a match is found, device plays the corresponding ring or call-waiting tone. Otherwise, device plays the default ring. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 98: Rtp S Tatistics – The X-Rtp-S Tat H Eader

    *04 – Make a RTP Packet Loopback Call. Note that outbound Media Loopback Call is not subjected to call duration limit; it will last until the user hangs up or until the called device ends the call. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 99 Website of this service provider. Maximum Length = 127 characters Phone number to contact this service provider. ContactPhoneNumber Maximum Length = 31 characters Email address to contact this service provider. EmailAddress Maximum Length = 127 characters. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 100 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 101 Available choices are: Follow ProxyServerTransport Note: Option not available on OBi100/OBi110 X_BypassOutboundProxyInCall Enable this option to bypass the OutboundProxy inside a SIP dialog. Note: Option not available on OBi100/OBi110...
  • Page 102 (e.g 0.1 of 60s is 6s). If value is 0 or blank, OBi will determine a proper margin on its own. Note: Option not available on OBi100/OBi110 TimerT1 Value of SIP timer T1 in ms TimerT2...
  • Page 103 X_MWISubscribe Enable this option to have the device SUBSCRIBE to the message-summary event package to support MWI and VMWI service. Note that device handles NOTIFY of this event package regardless MWISubscribe is Copyright 2010-2013 Obihai Technology, Inc.
  • Page 104 DNS Server to resolve the ProxyServer or OutboundProxy name as a SRV record. The standard prefix is _sip._udp. for SIP over UDP, _sip._tcp. For SIP over TCP, Copyright 2010-2013 Obihai Technology, Inc.
  • Page 105 _sip._tls. for SIP over TLS. X_UserEqPhone Include the parameter ‘user=phone’ in Request-URI and To-URI of outbound INVITE. Note: Option available on OBi100/110 only X_CallWaitingIndication Enable inclusion of an indication in a 18x response to the calling peer if this is a call- waiting situation.
  • Page 106 (such as a SIP ALG) Note: Option available on OBi100/110 only X_EchoServer Name or IP address of an echo server for SIP ALG detection X_EchoServerPort Listening of the echo server for SIP ALG...
  • Page 107 <userid>@<local_IP_address> as its canonical name X_RTCPMux Enable the use a rtcp-mux attribute in SDP (i.e., send and receive RTCP on the same port as RTP). Copyright 2010-2013 Obihai Technology, Inc.

  • Page 108: Google Voice™ Service

    Accept the setting of the parameter ITSP Profile A/B – General::DTMFMethod. The value can be either InBand or RFC2833. Other values will be reverted to RFC2933. Default is RFC2833. Voice Service Features of the OBi Device. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 109 SP1, SP2, SP3, and SP4 Services Copyright 2010-2013 Obihai Technology, Inc.
  • Page 110 PHONE port. The ringing pattern will be taken from the given profile. Choices are A, or B X_CodecProfile Select a Codec Profile for all calls on this service. Choices are A, or B Copyright 2010-2013 Obihai Technology, Inc.
  • Page 111 - stun: A standard STUN binding request; device will use the binding response to form its contact address for REGISTRATION - custom: use the value of X_CustomeKeepAliveMsg (note: option not available on OBi100/OBi110) X_CustomKeepAliveMsg Defines the custom message to be used when X_KeepAliveMsgType is “custom”. The value should have the following format: mtd=NOTIFY;event=...
  • Page 112 SIP messages for keep-alive are sent only once without retransmission; response to the SIP messages are ignored by the OBi. Note: Option not available on OBi100 and OBi110 X_UserAgentPort UDP port where the device sends and listens for SIP messages...
  • Page 113 {4086578118>:sp3} The SP3 InboundCallRoute shall be: {sp1(408657118@local_client)} Note: Option not available on OBi100/OBi110. X_ProxyClientConfig A list of IP phone attributes separated by a space or newline character for provisioning an IP Phone with the given MAC address and model number. Each attribute has the syntax <attribute-name>=”<attribute-value>”...
  • Page 114 Cisco/SPA303 Cisco/SPA504G Cisco/SPA508G Cisco/SPA509G Cisco/SPA525G Note: Option not available on OBi100/OBi110 X_AcceptResync Control whether to accept a SIP NOTIFY request with yes without event=resync to trigger a reboot of the device (so it can authentication download new f/w or configuration upon boot up). Available...
  • Page 115 Note: Option not available on OBi100/OBi110 SP”x” SIP Credentials AuthUserName The User ID to authenticate to a SIP UAS (User Agent Server) when an outbound SIP request sent by the device is challenged by the UAS with a 401 or 407 Response...
  • Page 116 X_BlockedCallers A comma separated list of up to 10 caller numbers to block from calling this service. Note: Option not available on OBi100 and 110 MWIEnable Enable Message Waiting Indication Service for this service. If enabled, device plays stutter dial tone on the PHONE port (or PHONE1 port) when there are new messages for the subscriber.
  • Page 117 Note: Option available on OBi200/OBi202 only X_GTalkSimultaneousRing Ring all other clients using the same Google Voice account at present. Note: Option available on OBi200/OBi202 only X_SRTP This is a drop down list with 3 choices: Disable SRTP Copyright 2010-2013 Obihai Technology, Inc.
  • Page 118 For example, SP1 has a local_client with the user-id 4086578118. The client wishes to make and receive calls on SP3 which has been set up with Google Voice. The SP1 InboundCallRoute shall include the following rule: {4086578118>:sp3} The SP3 InboundCallRoute shall be: {sp1(408657118@local_client)} Copyright 2010-2013 Obihai Technology, Inc.

  • Page 119: Obitalk Service Settings

    Select a Ring Profile to ring the PHONE port with when an incoming call is routed to the PHONE port. Choices are A, or B CodecProfile Select a Codec Profile to be used for all calls on this service. Choices are A, or B. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 120 DND (Do Not Disturb) Service is enabled on this service If the call is routed to the PHONE port where the phone is in a busy state (such as ringing, dialing, playing reorder, or already having 2 calls in progress) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 121 Note: 1 ring is approximately 6s BlockedCallers A comma separated list of up to 10 caller numbers to block from calling this service Note: Option not available on OBi100/OBi110 MaxSessions The maximum number of simultaneous calls that may be established on this service AnonymousCallBlockEnable Enable blocking of Anonymous Calls on this service.
  • Page 122 Note: If AuthPassword is specified, AuthUserID may be set to blank to let the device use the default value which is a special hash of the AuthPassword. This is only applicable if the external gateway is also an OBi device that understands how to generate the default AuthUserID using the same hash function. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 123: Auto Attendant Service

    AA to callback the current number (typically the case), he can simple enter 00# after selecting option 3 on the AA menu. Note that $1 can only be used as part of a substitution element in the digit map; it must not be used for matching elements since its value is unknown. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 124: U Ser R Ecorded P Rompts

    = play the entire User2 prompt from start to finish %User3%;r=1300-3720 = play User3 prompt starting from 1300ms mark to the 3720ms mark %User4%;r=3200-1200 = does not play anything since <end> is less than <start> Copyright 2010-2013 Obihai Technology, Inc.
  • Page 125 Enter number followed by the # key. Prompts user to enter a valid number after option 2 or option 3 is selected by the user Thank you for choosing Obihai When user presses * or # key to leave the AA Technology. Goodbye.
  • Page 126 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 127 Note that while forking to multiple numbers in an {(<**2:>(Msp2)):sp2}, AA outbound call routing rule is not supported on {(<**8:>(Mli)):li}, OBi100 and OBi110, it is supported on the OBi202. {(<**9:>(Mpp)):pp}, {(Mpli):pli} For example, on the OBi202 you may have a rule For OBi:202/OBi302: Copyright 2010-2013 Obihai Technology, Inc.
  • Page 128 PHONE1 and PHONE2. In general you can have up {(<**1:>(Msp1)):sp1}, to 4 destinations is a forking rule. On the other {(<**2:>(Msp2)):sp2}, hand, you must not specify more than one {(<**3:>(Msp3)):sp3}, destination number on the OBi100 and OBi110. {(<**4:>(Msp4)):sp4}, {(<**70:>(Mli)):li}, {(<**82:>(Mbt2)):bt2}, {(<**81:>(Mbt)):bt}, {(<**8:>(Mbt)):bt}, {(<**9:>(Mpp)):pp},...
  • Page 129 Menu Prompt List to replace the system’s Menu message PleaseWait Prompt List to replace the system’s PleaseWait message EnterNumber Prompt List to replace the system’s EnterNumber message Prompt List to replace the system’s Bye message Copyright 2010-2013 Obihai Technology, Inc.

  • Page 130: Voice Gateways

    Use only the device’s local address as the SIP Contact, and ignore any NATed address discovered by the device. Use the gateway’s SIP URL to form the FROM header of the outbound INVITE. Use the gateway’s AuthUserID and AuthPassword for authentication. Apply the symmetric RTP concept. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 131 SIP URL, such as: SP1(sip.mycompany.com:5060), or SP2(192.168.15.113) DigitMap DigitMap for this VG. It can be referenced as (xx.) (Mvgn) AuthUserID A User-ID to authenticate with the gateway AuthPassword A Password to authenticate with the gateway Copyright 2010-2013 Obihai Technology, Inc.

  • Page 132: Trunk Groups

    (optional) TrunkList A comma separated list of names of trunks For TG1, the default for to include in this trunk group. OBi100 and OBi110 is: sp1,sp2 and for OBi202 is: sp1,sp2,sp3,sp4 For other TG, the default is...

  • Page 133: Obibluetooth

    “OBi” from the list to establish a connection. If the operation is successful, it should say connected. With that, you are ready to make and receive mobile calls on the OBi via your mobile handset. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 134: Obibluetooth Call Feature

    OBiBT at a time. In other words, there is no 3-way call or call-waiting support on OBiBlueTooth. The supported call features are similar to the equivalent ones supported under SP or OBiTALK service. The screenshot below shows the Calling Feature parameters on the OBiBluebooth device web page, which should be self- explanatory. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 135 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 136 This service already reaches the limit of simultaneous calls as specified in MaxSessions DND (Do Not Disturb) Service is enabled on this service If the call is routed to the PHONE port where the phone Copyright 2010-2013 Obihai Technology, Inc.
  • Page 137 A blank or 0 value implies the call duration is not limited. AAAskForConfirm When an incoming call on this service is answered by the AA, enabling this option lets the AA ask for confirmation Copyright 2010-2013 Obihai Technology, Inc.

  • Page 138: Phone Interface Features Of The Obi Device

    The ring for alerting local user when the called party rings or answers is taken from outgoing trunk’s RepeatDialRing parameter. Repeat Dial service cannot be used on the LINE port. If the last call was made over the LINE port, dialing *05 will result in fast busy. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 139 Repeat Dial calls are not logged to call history, except the last and successful one when the called party rings or answers. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 140 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 141 See OBi Call Routing and Digit Map Section for a For OBi110: description of the syntaxes to specify this parameter {([1-9]x?*(Mpli)):pp}, {(<#:>|911):li}, {**0:aa},{***:aa2}, {(<**1:>(Msp1)):sp1}, {(<**2:>(Msp2)):sp2}, {(<**8:>(Mli)):li}, {(<**9:>(Mpp)):pp}, {(Mpli):pli} Copyright 2010-2013 Obihai Technology, Inc.
  • Page 142 This list of digit maps serve the purpose of mapping For OBi110: a caller’s number to one that includes the desired dialing {pli:(xx.)}, prefix used exclusively for call return service. {sp1:(<**1>xx.)}, {sp2:(<**2>xx.)}, {li:(<**8>xx.)}, {pp:(<**9>xx.)} For OBi202: {pli:(xx.)}, {sp1:(<**1>xx.)}, Copyright 2010-2013 Obihai Technology, Inc.
  • Page 143 - SP3, SP4, BT1, and BT2 not available on OBi100/OBi110 - PSTN Line not available on OBi100 - TG2 not selectable as Primary Line on OBi100/OBi110 ToneOnPrimaryServiceDown Select the tone to play in place dial tone when the service Normal Dial Tone (OBi202 and OBi302 only) corresponding to the Primary Line is out-of-service.
  • Page 144 This parameter is used to set a sensitivity level for OBi silence detection algorithm. Available choices are: Low (harder to detect silence) Medium (suggested) High (easier to detect silence) Calling Features Copyright 2010-2013 Obihai Technology, Inc.
  • Page 145 Enable Caller ID Signal generation. This option can be set to Yes even if the attached phone is not capable of displaying Caller ID. There is no harm in sending Caller ID signal while the phone is in the on hook state. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 146 (1), and swaps between the two calls in scenario (2) (as in a call waiting situation) UseExternalConferenceBridge Enable the use of an external conference bridge for Copyright 2010-2013 Obihai Technology, Inc.
  • Page 147 SUA. Note that the keyword cbridge is hard-coded and must not be changed. Note: Option not available on OBi100/110 CallWaitingEnable Enable call waiting service. Call Waiting is the situation where a new incoming call is routed to the PHONE port when there is already another call connected.
  • Page 148 The number to call to get music streamed to the remote party when the remote party is placed on hold. Note: Option not available on the OBi100 and OBi110 PlaySITOnCallFailureCodes A list of (3-digit) error response codes on outbound calls ([4-9]xx) to trigger SIT w/ optional announcement of the error.
  • Page 149 (that can accommodate one or more optional digits) is matched. Note: Option not available on OBi100/OBi110 (where the long inter-digit timer is always 10s) DigitMapShortTimer Value of the short inter-digit timer (in seconds) when collecting dialed digits according to the DigitMap on this phone port.

  • Page 150: Telephone Line Interface Features Of The Obi Device

    Note: Option not available on OBi100 and OBi110 (where the short inter-digit timer is always 2s) Tip Ring Voltage Polarity IdlePolarity Tip/Ring voltage polarity the line is idle, before a call is Forward connected, or after one side hangs up. Choices are:...
  • Page 151 InboundCallRoute of this service. The ring pattern is taken from the selected Ring Profile. Valid choices are 1-10 CallOnHoldRing Pattern to ring PHONE port when holding a call on this trunk that has been connected to the PHONE Copyright 2010-2013 Obihai Technology, Inc.
  • Page 152 Enable call forwarding of all calls unconditionally by the device. If CallForwardUnconditionalNumber is blank, this parameter is treated as if it has been set to No. Note: It is possible for a user to set this parameter Copyright 2010-2013 Obihai Technology, Inc.
  • Page 153 Note: It is possible for a user to set this parameter from the phone using a Star Code Enable Do Not Disturb Service. If enabled, all incoming calls on the PSTN line will be treated with DoNotDisturbEnable busy handling by OBi device. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 154 CPC signal during a connected call on the PSTN line. It then proceeds to tear down the call and takes the LINE port hardware to the On-Hook state CPCTimeThreshold Minimum duration in milliseconds to declare CPC signal Copyright 2010-2013 Obihai Technology, Inc.
  • Page 155 Minimum ring frequency to detect RingFrequencyMax Maximum ring frequency to detect RingThreshold Voltages (Vrms) below the lower limit will not trigger ring detection; 40.50-49.50 voltages above the upper limit will RingValidationTime Time in ms to validate the ring signal Copyright 2010-2013 Obihai Technology, Inc.

  • Page 156: Codec Profile Features Of The Obi Device

    The codecs available on the OBi100/OBi110 and on the OBi200/OBi202/OBi300/OBi302 are slightly different. Below screen shots show the Codec Profile web page for each device model.
  • Page 157 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 158 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 159 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 160 Note: Informational only; not configurable G711A Codec Codec Codec Name G711A BitRate Bit rate in bits/sec Note: Informational only; not configurable 64000 Enable Enable this codec SilenceSuppression Enable silence suppression for this codec PacketizationPeriod Packet size in ms Copyright 2010-2013 Obihai Technology, Inc.
  • Page 161 PacketizationPeriod Packet size in ms Priority Priority assigned to this codec (1 is the highest) G726R16, G726R24, and G726R40 codecs are only available only on the OBi100/110; iLBC codec is only available on the OBi200/OBi202/OBi300/OBi302 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 162 Two values to choose from: big-endian or little-endian big-endian T38Enable Enable the use of T38 (FAX Relay). Note: Option not available on the OBi100 and OBi110 T38Redundancy The packet redundancy factor to use when operating T38 relay. Available choices are: 0 (no redundancy) 2 (higher redundancy;...

  • Page 163: Tone & Ring Patterns

    Field - 3/4/5/6 share the same definition, and each field describes one single cadence segment. Together 4 fields form a macro-segment, which will be repeated until tone playback expires. The expression is a string of numeric values with the special notation '/', '(', ')' and ','. It has a complete format as below: Copyright 2010-2013 Obihai Technology, Inc.
  • Page 164 The above example illustrates using the first frequency to generate tone for 0.3 seconds, followed by 2.34 seconds of silence, then use a combination of the first and second frequencies to generate tone for 2 seconds, then followed by 1.5 seconds silence. The cadence operates repeatedly for 4 seconds. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 165: Tone Example:

    The 2nd on-off section: generated by the 2nd frequency component, and it has 0.38 tone second active time and 0 inactive time.  The 3rd on-off section: generated by the 3rd frequency component, and it has 0.38 tone second active time and 0 inactive time. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 166 Tone Profile A & B Parameter Guide: Parameter Description Default Setting Dial Tone ToneName Dial Tone TonePattern Obihai Tone Pattern Script 350-18,440-18;20 Ringback Tone ToneName Ringback Tone TonePattern Obihai Tone Pattern Script 440-18,480-18;-1;(2+4) Busy Tone Copyright 2010-2013 Obihai Technology, Inc.
  • Page 167 Howling Tone for off-hook warning TonePattern Obihai Tone Pattern Script 480+3,620+3;10;(.125+.125) Prompt Tone ToneName Prompt Tone to prompt user to enter a number for configuration, such as speed dial TonePattern Obihai Tone Pattern Script 480-16;20 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 168 TonePattern Obihai Tone Pattern Script 350-16;10;(.1+.1,.1+9.7) SIT Tone 1 ToneName Special Information Tone - 1 (Not configurable) TonePattern Obihai Tone Pattern Script 985-16,1428-16,1777- 16;20;(1/.380+0,2/.380+0,4/.380+0,0/0+4) SIT Tone 2 ToneName Special Information Tone - 2 (Not configurable) Copyright 2010-2013 Obihai Technology, Inc.

  • Page 169: Ring Profile A & B Features Of The Obi Device

    Negative value: Ringing lasts indefinitely  No value: Ringing lasts infinitely  Zero value: Ringing is skipped  Positive value: Normal ringing duration Example: 30.5 The above example illustrates a ringing tone that terminates after 30.5 seconds. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 170 The above example illustrates a ringing tone comprised of two segments. Ringing is active for 0.3 seconds, followed by 2.34 seconds of silence, then ringing for 2 seconds, and followed by 1.5 seconds of silence. The above cadence operates repeatedly for 4 seconds. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 171 440-18;30;(.1+.1,.1+.1,.1+10) Call Waiting Tone 5 Distinctive Call Waiting Tone 5. An incoming SIP ToneName INVITE may include the same name in an Alert-Info Bellcore-dr5 header to choose this ring TonePattern Obihai Tone Pattern Script 440-18;30;(.3+.1,.1+.1,.3+10) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 172 440-18;30;(.3+2) Call Waiting Tone 10 Distinctive Call Waiting Tone 10. An incoming SIP ToneName INVITE may include the same name in an Alert-Info User-dr5 header to choose this ring TonePattern Obihai Tone Pattern Script 440-18;30;(.3+2) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 173 Obihai tone cadence script 60;(.25+9.75) Ring Pattern 10 RingName Name of the ring. An incoming SIP User-dr5 INVITE may include the same name in an Alert-Info header to choose this ring RingPattern Obihai tone cadence script 60;(.25+9.75) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 174 Copyright 2010-2013 Obihai Technology, Inc.

  • Page 175: Star Code Profile Features Of The Obi Device

    $LBP1 = Loopback RTP packets once in the next call on this phone port (phone-port specific; admissible value: 1) $BAR1 = Barge-In once in the next call on this phone port (phone-port specific; admissible value: 1) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 176 (Not available on OBi100/OBi110) $IBDT = Enable in-band DTMF transmission once in the next call on this phone port (phone-port specific; admissible value: 1) (Not available on OBi100/OBi110) $BCLR = Clear all blocked callers (trunk specific; admissible value: 1) $CIDG = Enable Generate Caller ID Generation on this phone port (phone-port specific; admissible value: 1 for enable, 0 for disable) $CWCIDG = Enable CWCID Generation on this phone port (phone-port specific;...
  • Page 177 Collects a number from the user according to the DigitMap. Then set the CallForwardUnconditionalNumber on all trunks to the collected value, and set the CallForwardUnconditionalEnable on all trunks to Yes To modify the script to enable CallForwardUnconditional on SP1 only, change it to *72, Call Forward Unconditional SP1, coll(SP1($cfan)),set(SP1($cfa),1) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 178 After user dials *75, OBi expects one or two more digits from the user which represent a speed dial slot index (1 to 99). The 1 or 2-digit variable part is stored in the variable $code. OBi device then announces the number stores in the speed dial slot, or says “not available” if the slot is empty. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 179 *96, Barge In, set($Bar1,1) Code30 Default = OBiBT 1 Discoverable Star Code *28, OBiBT Discoverable, btdscvr(0) (Not available on OBi100 and OBi110) Code 31 Default = Enable ObiWiFi as Access Point *27, run OBiWiFi as Access Point, wifiap() (Not available on OBi100 and OBi110)
  • Page 180 (Requires OBiPLUS Subscription) Code35 *28, OBiBT Discoverable, btdscvr(1) Code36 Code37 Code38 Code39 Code40 Note: Code31 – Code40 are not available on OBi100 and OBi110 Copyright 2010-2013 Obihai Technology, Inc.

  • Page 181: User Settings Features Of The Obi Device

    8, and the user can dial 8*14085551234 to call 14085551234 using the given gateway. Note: At the present time, only gateways that are accessed with an OBi number can be used this way. Speed Dial Settings Speed Dials Parameter Guide: Copyright 2010-2013 Obihai Technology, Inc.
  • Page 182 It must be Label alphanumeric, not containing any spaces, and different from other user- defined or built-in digit map labels DigitMap A valid digit map Copyright 2010-2013 Obihai Technology, Inc.
  • Page 183 FileFilter, and WriteEnable. These attributes are explained in the parameter table below. Anonymous: The admin can enable anonymous access where the user does not need to login. However the access is limited to read-only for anonymous users. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 184 Here is a screen short of the File Sharing Settings device web page. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 185 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 186 Enable and Password for User N UserID is case sensitive. It must be an alphanumeric string, must not start with a number, UserID and must not contain any space. userN Maximum length is 64 characters. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 187 Maximum length of this field is 256 characters. By enabling write access to the file system, you allow the user to upload, copy, remove, rename, WriteEnable cut and paste files, or create, remove, and rename directories on the USB storage device. Copyright 2010-2013 Obihai Technology, Inc.

  • Page 188: File Explorer

    On the far right of the status bar is the User ID of the current login user and the logout button, which are not shown for anonymous level login. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 189 Any intermediate directory in the given path name Create a new folder with the given path name if it will be created automatically if it does not exist does not exist already; an input box will pop up Copyright 2010-2013 Obihai Technology, Inc.
  • Page 190 Copy the links (URLs) of the selected items to the to ask for confirmation before proceeding; the user clipboard of the local host may need to press Control+C for example before the Link Locations (URLs) are copied into clipboard of the local host. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 191 In this document we refer to the PHONE ports and the AA as endpoints. Like the trunks, each endpoint is represented by a 2-letter abbreviation and a 1- based instance identifier: Copyright 2010-2013 Obihai Technology, Inc.
  • Page 192 If you are not familiar with how digit map works yet, please read the Digit Map Configuration Section in this document first. PHONE2 or PH2 Port is available on the OBi202/OBi302 only Copyright 2010-2013 Obihai Technology, Inc.
  • Page 193 A terminal may be a trunk or an endpoint. Abbreviated terminal names are case-insensitive number and number-to-call are literal strings, such as 14089991234 digit-map is just any proper digit map, such as (1xxx|xx.); make sure to include the enclosing parentheses Copyright 2010-2013 Obihai Technology, Inc.
  • Page 194 It says: Ring both PHONE port and AA for calls coming from 1 408 122 3330 or 1 510 331 3456, block all 800, 888, and anonymous calls, and ring the PHONE port for all other calls Copyright 2010-2013 Obihai Technology, Inc.
  • Page 195 := cid > target x := 1 OR 2 OR 3… (where applicable; can be omitted if it is equal to 1) cid = spoofed-caller-number target = number-to-call OR $2 embedded-digit-map = (Mlabel) OR digit-map Copyright 2010-2013 Obihai Technology, Inc.
  • Page 196 1) sp1 OR {SP1} OR {:SP1} OR {@:Sp1} (all equivalent) This rule says: Make all calls using SP1 Service, without any caller-id spoofing or digit transformation {(<#:>|911):li},{**0:aa},{***:aa2},{(Mpli):pli},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**8:>(Mli)):li},{(<**9:>( Mpp)):pp} This is the default OutboundCallRoute for the PHONE port. It says: Copyright 2010-2013 Obihai Technology, Inc.
  • Page 197 NOT needed or allowed for the literals in this context; special characters may be used here as they do not apply in this context either. Elements can be empty, in which case the ‘:’ may be omitted. This case is useful for inserting Copyright 2010-2013 Obihai Technology, Inc.
  • Page 198 <**1:>1408xxxxxxx – Matches any number that starts with **11408 followed by 7 digits. OBi removes the **1 prefix when making the call *74(x|xx) – Matches any number that starts with *74, followed by 1 or 2 digits Copyright 2010-2013 Obihai Technology, Inc.
  • Page 199 The long and the short timer values are set to 10s and 2s respectively by default and are configurable per phone port via the DigitMapLongTimer and DigitMapShortTimer parameters respectively (execpet on OBi100/OBi110 where the two timer values are not configurable). Whether to use the long or short interdigit timer depends on the current rule matching states.
  • Page 200 7-digit when the (short) interdigit expires. On the 8 digit and beyond, however, the DMP will consider the first rule only and return the accumulated digits as is when the (long) interdigit timer expires. Copyright 2010-2013 Obihai Technology, Inc.
  • Page 201 – cw10 = Call Waiting Tone 1-10, respectively di = Dial Tone di2 = Second Dial Tone fb = Fast Busy Tone ho = Holding Tone od = Outside Dial Tone pr = Prompt Tone Copyright 2010-2013 Obihai Technology, Inc.
  • Page 202 5s when no more digits are received. Without the {L=5} syntax the user will have to wait for 10s (by default) for the same to happen. Note: This feature is not available on the OBi100/OBi110. User Defined Digit Maps Starting from release 1.2, there are 10 user definable digit maps available under the User Settings –...
  • Page 203 <user-id>@<a>.<b>.<c>.<d> and <user-id>@<a>.<b>.<c>.<d>:<port> respectively. Here are some examples: 1234*192*168*15*113 maps to 1234@192.168.15.113 123456*192*168*15*180*5061 maps to 123456@192.168.15.180:5061 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 204 Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML LED Indications...
  • Page 205 SIP Proxy Redundancy – Local or DNS Based SVR, Primary & Secondary Fallback List Restrict Source IP Address Maximum Number of Sessions – Independent per Service Trunk Groups (4) Voice Gateway – Direct Dialing (8) G.711 A-Law G.711 µ-Law Copyright 2010-2013 Obihai Technology, Inc.
  • Page 206 Caller ID Number Caller ID Name (Alphanumeric) Call Waiting Maximum Session Control Call Forward - Unconditional Call Forward on Busy Call Forward on No Answer (Ring Count Configurable) Call Transfer Enable / Disable Anonymous Call Block Copyright 2010-2013 Obihai Technology, Inc.
  • Page 207 Yes – Located on Bottom of Case LEDs 3 – Power + Status, Ethernet Activity, Phone LED Indications Power On, Device Status, Upgrade in Progress Status, Packet RX/TX, Phone Port Status Certifications FCC Part 15 Yes – Class B A-Tick Copyright 2010-2013 Obihai Technology, Inc.
  • Page 208 Quick Start / Installation Guide Documentation User / Administrative Guide Implementation Guide for Service Providers ** OBi100 Voice Service Bridge and Telephone Adapter Power Adapter Package Contents 1 x RJ-45 Ethernet Cable (80 inches / 203 centimeters) Quick Start / Installation Guide...
  • Page 209 On-Hook Speed: 0.5ms, 3ms (ETSI), 26 (AU) Tip-Ring Voltage: 3.1v, 3.2v, 3.35v, 3.5v Min Operational Loop Current: 10mA, 12mA, 14mA, 16mA Current Limiting Enable Channel Tx Gain Channel Rx Gain Line In-Use Voltage Threshold Line In-Use Current Threshold Copyright 2010-2013 Obihai Technology, Inc.
  • Page 210 Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML Power, Device Status, Upgrade in Progress Status, Ethernet Activity, PHONE Port Status,...
  • Page 211 Automatic Attendant (English) with Configurable Answer Delay Telephony PIN Access Control to AA (Up to 4 PINs) Recursive Digit Map for Call Routing (AA, Line, Phone, Voice Gateways, Trunk Groups) AA Configurable Outbound Call Routing Rule Copyright 2010-2013 Obihai Technology, Inc.
  • Page 212 Ringing & Call Waiting Tone Configuration Ring Patterns (10) - Configurable Call Waiting Tone Patterns (10) - Configurable Call Waiting Tone Pattern Profiles (2) Configurable Start Codes Star Code Configuration Star Code Profiles (2) Redial Copyright 2010-2013 Obihai Technology, Inc.
  • Page 213 (width x depth x height) 4.5 x 4.2 x 1.2 inches Unit Weight 255 grams / 9 ounces Shipping Weight 400 grams / 14 ounces (Including Power Supply, Cables and Packaging) Mounting Desktop or Wall Mountable Copyright 2010-2013 Obihai Technology, Inc.
  • Page 214 1-Year Hardware (Limited) Engineering & Design Location California, USA Country of Origin China HST Code 8517.62.00 All content subject to change. Data Sheet State This data sheet is not a warranty. Data Sheet Version 140911.110.1 Copyright 2010-2013 Obihai Technology, Inc.
  • Page 215 Secure Remote Firmware Update Encrypted Binary File via TFTP or HTTP + Dedicated User Name & Password Customization OBi-ZT: Obihai Zero-Touch Automatic Customization & Configuration ** Call History (CDRs) Call Detail Records on OBi Web Page, Export to XML LED Indications...
  • Page 216 - Upstream Data Rate Allocation - Highest Priority (Voice) Bandwidth Allocation - Priority Class Assignments (4) for Bandwidth Allocation - DiffServ Code Point (DSCP) to Priority Class Mapping VPN Pass-Thru - IPsec ESP (IP Security encapsulating security payload) Copyright 2010-2013 Obihai Technology, Inc.
  • Page 217 Tone Profile per SIP SP and OBiTALK service Ring Profile per SIP SP and OBiTALK service Star Code Profile per SIP SP and OBiTALK service Full Duplex Audio G.165, 168 Echo Cancelation VAD – Voice Activity Detection Copyright 2010-2013 Obihai Technology, Inc.
  • Page 218 Activate Call Forward on Busy Deactivate Call Forward on Busy Activate Call Forward on No Answer Deactivate Call Forward on No Answer Activate Block Anonymous Calls Deactivate Block Anonymous Calls Activate Call Waiting Deactivate Call Waiting Copyright 2010-2013 Obihai Technology, Inc.
  • Page 219 36.0 cm x 33.0 cm x 26.8 cm – 14.2 in x 13 in x 10.5 in Carton Weight 8.2 Kilograms / 18 pounds Cartons Per Std. 20 / 40 ft Container 896 / 1,848 Cartons – Non-palletized Miscellaneous Requirements Active Internet Connection Copyright 2010-2013 Obihai Technology, Inc.
  • Page 220 Technology will not be liable to you or any third party for any costs or damages arising directly and or indirectly from the use Obihai’s hardware & software including without limits any damage, or for any loss whatsoever. Copyright 2010-2013 Obihai Technology, Inc.

This manual is also suitable for:

Obi110Obi200Obi302Obi202Obi300

Table of Contents

Save PDF