WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
adding interrupt failed
An interrupt handler could not be registered while the fjulsa driver was being attached. Installed memory may be insufficient.
If the amount of memory does not seem to be the problem, contact a support representative.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
hba attach setup failed
hba attach could not be set up while the fjulsa driver was being attached. Installed memory may be insufficient. If the
amount of memory does not seem to be the problem, contact a support representative.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
creating kmem cache failed
A control area could not be allocated while the fjulsa driver was being attached. Installed memory may be insufficient. If the
amount of memory does not seem to be the problem, contact a support representative.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
creating minor node failed
Control information could not be created while the fjulsa driver was being attached. Installed memory may be insufficient. If
the amount of memory does not seem to be the problem, contact a support representative.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
Target #: disabled TQ since disconnects are disabled
The TAG setting was invalidated because disconnect disabled is specified for target#. Contact customer support.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
creating pm component failed
The pm component could not be created while the fjulsa driver was being attached. Installed memory may be insufficient. If
the amount of memory does not seem to be the problem, contact a support representative.
WARNING:/pci@#,#/FJSV,(e)ulsa@#(fjulsa#):
ulsa_hs_msg_init failed
An area for Handshake could not be allocated while the fjulsa driver was being attached. Installed memory may be
insufficient. If the amount of memory does not seem to be the problem, contact a support representative.