GB
Read this manual thoroughly before installing and
using the appliance. This is the only way to ensure
best results and maximum safety for the user.
DESCRIPTION (see page 3)
The terminology below will be used repeatedly on the
following pages.
1 Cup warmer plate
2 Release lever
3 Milk tank
4 Locking slide
5 Froth regulator
6 Frothing chamber lid
7 Milk tank lid
8 Water tank
9 Power cable
10 Cup tray grid
11 Drip tray
12 Filter disk
13 Presser
14 Measure
15 Coffee filter holder
16 Large filter for 2 cups ground coffee
17 Small filter for 1 cup ground coffee or pods (if
present)
18 ON/OFF button
19 Coffee button
20 IFD button
21 ON/OFF luminous button
22 OK (coffee ready) light
23 IFD light
24 Cleaning brush
SAFETY WARNINGS
• This appliance is designed to "make espresso coffee"
and "heat drinks". Use with care to avoid scalds
from the water and steam jets or through incorrect
use.
• Never touch hot parts.
• After removing the packaging, make sure the
product is complete and undamaged. If in doubt, do
not use the appliance and contact a qualified
professional.
• Do not leave packaging (plastic bags, polystyrene
foam, etc) within reach of children as it could be
dangerous.
• This appliance is for home use only. Any other use is
considered improper and thus dangerous.
12
• The manufacturer cannot be held responsible for any
damage caused by inappropriate, incorrect or
irresponsible use.
• Never touch the appliance with damp or wet hands
or feet.
• Never allow the appliance to be used by children or
unfit persons without supervision.
• Never allow children to play with the appliance.
• If the appliance breaks down or malfunctions, turn
off and do not tamper.
If it requires repair, contact an authorised service
centre only and ask for original spare parts to be
used.
Failure to respect the above could reduce the safety
of the appliance.
• The power cable must never be replaced by the user
as this requires the use of special tools. If the cable is
damaged or requires replacing, contact an
authorised service centre only to avoid all risks.
INSTALLATION
• Place the appliance on a work surface far away from
water taps and basins.
• Make sure the mains voltage corresponds to the
voltage indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed
socket with a minimum current rating of 10 A only.
The manufacturer may not be considered liable for
possible incidents caused by the failure to
adequately earth the mains.
• If the plug fitted to the appliance is not compatible
with the power socket, have the socket replaced by a
qualified professional.
• Never install the appliance in environments where
the temperature may reach 0°C or lower (it may be
damaged if the water freezes).
Need help?
Do you have a question about the EC750 and is the answer not in the manual?
Questions and answers