Connectors - Philips HTD3500 User Manual

Place the rear surround speakers to the
left and right side of your seating position,
either in line with it or slightly behind it. For
best effect, point the speakers towards the
seating position and place the speakers just
above the ear level (when seated).
5
SUBWOOFER (subwoofer):
Place the subwoofer at least one meter to
the left or right of the TV. Leave about ten
centimeter clearance from the wall.
Connect
Connect your speakers and the subwoofer to
your home theater as described in the quick
start guide.
Setup
Set up your speakers through the speaker setup
menu.
1
Connect your speakers and subwoofer as
described in the Quick start guide.
2
Turn on your TV, and switch to the correct
source for the home theater.
3
Press SETUP on your home theater
remote control.
4
Select [Audio Setup], and then press OK.
5
Change the following settings, and then
press OK.
[Speakers Volume]: Set the volume
•
level of each speaker.
[Speakers Delay]: Set the delay time
•
for speakers which are placed closer to
the seating position in order to obtain
equal audio transmission from all the
speakers.

Connectors

Connect other devices to your home theater.
9 EN
Front
(USB)
a
Audio, video or picture input from a USB
storage device.
b MUSIC iLINK
Audio input from an MP3 player.
Back connectors
a AC MAINS
Connect to the power supply.
b SPEAKERS
Connect to the supplied speakers and
subwoofer.
c HDMI OUT
Connect to the HDMI input on the TV.
d OPTICAL
Connect to an optical audio output on the
TV or a digital device.
e VIDEO OUT
Connect to the composite video input on
the TV.
f AUDIO IN-AUX
Connect to an analog audio output on the
TV or an analog device.
g ANTENNA FM
Signal input from an antenna, cable or
satellite.