Samsung Galaxy S III User Manual page 160

4. If not already active, in a single motion touch and slide
the S Beam slider to the right to turn it on.
5. On the source device (containing the desired image or
video), tap (Apps)
6. Locate and tap the selected image to open it in the
preview window.
Important! Neither device must be in Lock mode or displaying
the Lock screen. They must both be active and
unlocked. It is recommended that the target device
be on the Home screen.
7. Place the two active NFC-enabled devices back to back
to begin (1).
Note: If the Touch to beam screen does not appear on the
source device:
- Pull them apart
- Verify the image is visible in the preview window on
the source device (providing the file)
- Place them together again
154
(Gallery).
8. From the Touch to beam screen, tap the reduced image
preview to begin the transfer (2). After a few seconds
(depending on file size) the recipient with then see the
transferred file displayed on their screen.
Place device atop each other
Tap the source image