Removing and installing the
cowling and panel
1
2
ZAUM0270
1. Cowling A
2. Panel A
The cowling and panel shown above
need to be removed to perform some of
the maintenance jobs described in this
chapter. Refer to this section each time
a cowling or panel needs to be re-
moved and installed.
Cowling A
To remove the cowling
Remove the screws, and then take the
cowling off.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18740
1
ZAUM0271
1. Screw
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Panel A
To remove the panel
1. Open the storage compartment.
(See page 3-10.)
2. Remove the screw, and then take
EAU18790
the panel off.
ZAUM0272
1. Panel A
2. Screw
To install the panel
1. Place the panel in the original posi-
2. Close the storage compartment.
EAUM1250
6-6
2
1
tion, and then install the screw.
6
Need help?
Do you have a question about the AEROX YQ50 and is the answer not in the manual?
Questions and answers