Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Related Manuals for Kodak i2400
Summary of Contents for Kodak i2400
-
Page 2: User Precautions
USA, visit: www.kodakalaris.com/go/scannerrecycling. • The product packaging is recyclable. • Parts are designed for reuse and recycling. • The Kodak i2400/i2600/i2800 Scanners are Energy Star compliant and are shipped from the factory with the default time set to 15 minutes. European Union This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate facilities for recovery and recycling. -
Page 3: Accessories
EMC statements United States: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 4 OVERVIEW INSTALLATION SCANNING MAINTENANCE TROUBLESHOOTING APPENDICES A & B...
- Page 5 • Kodak i2400 Scanner — duplex scanner that scans 30 pages per minute at 200 and 300 dpi in black and white, color and grayscale. The i2400 Scanner allows you to scan 50 documents at a time and the dual LED indirect light provides excellent image quality.
-
Page 6: What's In The Box
CAT No. 892 7717 • Kodak A3 Size Flatbed Accessory — the Kodak A3 Size Flatbed adds scanning capability for exception documents up to 11 x 17-inch (A3) size paper. CAT No. 179 6747 •... -
Page 7: Scanner Components
Scanner components The Kodak i2800 and i2600 Scanners have a graphical display and look like the illustration below. The Kodak i2400 Scanner is the same as the illustration below except there is a function window which is smaller than the graphical display. - Page 8 6 Up and Down Scroll buttons — allows you to select or scroll through predefined functions or applications by pressing the Up or Down scroll buttons. NOTE:The LED/Start button, Scroll button and Function window are used with Smart Touch functionality. 7 Output tray —...
- Page 9 Inside view 1 Scanner cover release lever — opens the scanner to allow access to the paper path for cleaning or clearing a document jam. The scanner must be in the tilted position to open the scanner cover. 2 Gap release lever — allows you to manually adjust the space between the feed module and separation module for documents that require special handling, e.g., documents that are badly torn.
-
Page 10: Table Of Contents
NOTE: If you have already performed all of the steps in the Installation Guide, skip this section. Installing the Kodak Driver 1. Insert the Kodak i2400/i2600/i2800 Scanners Installation CD in the Software: Windows CD-ROM drive. The installation program starts automatically. -
Page 11: Installing The Kodak Driver Software: Linux Operating Systems
NOTES: • Depending on the operating system you are installing on (Ubuntu, Fedora, or SUSE) the following procedures may be slightly different. • Kodak Scanner software requires QT3. Verify that your system has these installed (e.g., Fedora: Applications>Add/Remove Software). • You must be a super user to install the software. - Page 12 4. Plug the other end of the power cord into the wall outlet. NOTE: The green LED on the power supply indicates the power is 5. Attach the USB cable to the scanner USB port, located on the back of the scanner. 6.
-
Page 13: Turning On The Scanner
Turning on the scanner • Momentarily press the toggle button on the back of the scanner to turn the scanner on. When you turn on the scanner, the LED/Start button on the front of the scanner will flash as the scanner goes through a series of self tests. Please wait while the operating system synchronizes the scanner with the installed software. -
Page 14: Scanning
3 Scanning Contents Getting your scanner ready to scan ..........3-1 Getting your documents ready to scan ........... 3-3 Selecting your scanning application ..........3-4 Scanning with Smart Touch ............3-5 Getting your scanner 1. Be sure the scanner is on and ready to scan (LED/Start button will be green and constant). - Page 15 3. Adjust the side guides (by sliding them in or out) to accommodate the size of documents you are scanning. 4. Adjust the input tray. You can scan documents with the input tray open or closed. Feed documents with the input tray open if you are scanning a batch of documents.
-
Page 16: Getting Your Documents Ready To Scan
Depending on your scanner model, the input tray capacity (20 lb./ 80 g/m bond paper) is as follows: • i2400 Scanner — holds up to 50 documents • i2600 Scanner — holds up to 75 documents • i2800 Scanner — holds up to 100 documents... -
Page 17: Selecting Your Scanning Application
Selecting your Smart Touch — Kodak provides Smart Touch functionality which allows you to quickly and easily perform common scanning tasks; such scanning application • scan and share incoming client correspondence with a co-worker in a branch office • create a searchable PDF of a printed report •... -
Page 18: Scanning With Smart Touch
- complete with text, graphics, columns and tables. NOTE: Smart Touch may have been installed when you installed the Kodak Driver Software. The scanning applications listed above are provided on separate CDs that were included with your scanner. Refer to the application’s User’s Guide for instructions on how to install and use it. -
Page 19: Maintenance
4 Maintenance Contents Opening the scanner cover............. 4-1 Cleaning procedures............... 4-2 Cleaning the rollers ..............4-2 Cleaning the separation module..........4-3 Cleaning the feed module ............4-4 Vacuuming the scanner.............. 4-5 Cleaning the imaging area ............4-6 Running a transport cleaning sheet..........4-6 Replacement procedures ............... -
Page 20: Cleaning Procedures
“Supplies and consumables” at the end of this chapter provides a listing of the supplies required to clean your scanner. IMPORTANT: Only use cleaners such as those provided through Kodak Parts Services. Do not use household cleaners. Allow surfaces to cool to ambient temperature before use. -
Page 21: Cleaning The Separation Module
Cleaning the separation The separation module should be removed from the scanner for best module cleaning results. 1. Push the separation module up to snap out and lift it out of position. 2. Manually rotate and wipe the separation module tires with a roller cleaning pad. -
Page 22: Cleaning The Feed Module
Cleaning the feed module NOTE: Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Pull against the raised edge of the feed module cover and lift it up and out of position. 2. -
Page 23: Vacuuming The Scanner
4. Inspect the feed module. If the feed module tires show signs of wear or damage, replace the tires or the feed module. See the “Replacement procedures” for more information. 5. Use a vacuum or cleaning pad to remove dust and debris from the feed module area. -
Page 24: Cleaning The Imaging Area
Cleaning the imaging area 1. Wipe the upper and lower imaging area using a Brillianze Detailer wipe (Step 1) or Staticide wipe. Be careful not to scratch the imaging area when cleaning. IMPORTANT: Staticide wipes contain isopropanol which can cause eye irritation and dry skin. -
Page 25: Replacement Procedures
Replacement Kodak Scanners use replaceable tires that can feed a wide range of document types, sizes and thicknesses. Tire life and performance will procedures vary based on the customer’s document set, the frequency of cleaning the paper path and tires, and following the recommended schedule for changing tires. - Page 26 2. While holding onto the separation module, rotate the release lever back so you can access the separation roller. CAUTION: Use caution as the release lever is spring-loaded and will snap back if you do not hold it in place. 3.
-
Page 27: Replacing The Pre-Separation Pad
Replacing the pre- 1. Remove the separation module from the scanner by following the separation pad steps previously described in “Replacing the separation module and tires”. 2. Hold the separation module in both hands and locate the two side tabs which protrude slightly from the back of the separation module. 3. -
Page 28: Replacing The Feed Module And Tires
Replacing the feed module NOTE: The paper present sensor is located to the right of the feed and tires module. Be careful not to damage the paper present sensor when removing or cleaning around the feed module. 1. Lift the tab of the feed module cover and remove it from its position. 2. - Page 29 4. Remove each tire by sliding the tire off the core assembly. 5. Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear. 6. Replace the core assembly in the feed module. You may need to slide the shaft to the right or left so the core fits properly within the feed module housing.
-
Page 30: Adjusting The Pre-Separation Roller Tension
Kodak Digital Science Roller Cleaning Pads (qty 24) 853 5981 Kodak Digital Science Transport Cleaning Sheets (qty 50) 169 0783 Staticide Wipes for Kodak Scanners (qty 6 boxes of 24) 896 5519 Brillianize Detailer Wipes / for Kodak Scanners 826 6488... -
Page 31: Problem Solving
5 Troubleshooting Contents Problem solving ................5-1 LED codes ..................5-3 Indicator lights................. 5-3 Contacting Service................5-3 Problem solving Occasionally you may encounter a situation with your scanner where it may not function properly. Use the chart below as a guide to check possible solutions to help you resolve the situation before calling Technical Support. - Page 32 Draft (Fixed) in TWAIN or Fixed Processing in ISIS to improve the image or use the Kodak White Background Accessory. Red, green or blue streaks are running The scanner is dirty and needs to be cleaned. Refer to the “Cleaning through a color photo procedures”...
-
Page 33: Led Codes
LED codes Following is a list of the codes that may be displayed in the LCD display with a corresponding message. NOTE: If you have a Kodak i2400 Scanner, only the code will be displayed in the Function window. Codes... -
Page 34: Specifications
This appendix provides scanner specifications and system requirements. Scanner Type/Speed Kodak i2400 Scanner — a duplex scanner which provides black and white, grayscale and color scanning up to 30 pages per minute/60 images per minute at (throughput speeds may vary depending on driver, 200 and 300 dpi. -
Page 35: System Requirements
- Microsoft Windows 2008 Server x64 Edition - Linux Ubuntu 9.04, 10.04, 12.04 - Linux SUSE 11.1 - Linux Fedora 10 Available upon request for the i2400 Scanner only: - MAC OS v.10.8 Included Drivers: • Windows operating systems: TWAIN, ISIS, WIA •... - Page 36 (including breakage of a connector, cover, glass, pins, or seal); (c) from service, modification or repair not performed by Kodak or a service provider authorized by Kodak or by tampering, use of counterfeit or other non-Kodak components, assemblies, accessories, or modules;...
-
Page 37: How To Obtain Limited Warranty Service
Warranty Service descriptions Kodak Alaris Inc. offers a range of service programs to support its Limited Warranty and to assist with the use and care of the Kodak Scanner (“Service Methods”). A Kodak Scanner represents an important investment. Kodak Scanners provide the productivity needed to stay competitive. -
Page 38: Depot Service
Scanners must obtain a Return Material Authorization number (“RMA”) by calling (800) 822-1414, and within ten (10) business days from the date of issuance of the RMA must return the Kodak Scanner to the address designated in the RMA at the end user’s own expense and risk. - Page 39 Website: www.kodakalaris.com/go/docimaging For U.S. Service, Repair and Technical Assistance by Telephone: Telephone technical support is available Monday-Friday between the hours of 5 a.m. to 5 p.m. excluding Kodak holidays. Phone: (800) 822-1414 For Technical Documentation and FAQ’s available 24 hours a day: Website: www.kodakalaris.com/go/docimaging...
Need help?
Do you have a question about the i2400 and is the answer not in the manual?
Questions and answers