Chapter 2. Installing And Using The Lenovo Usb Portable Dvd Burner; Installing The Drive; Connecting The Drive; Installing Software - Lenovo USB Portable DVD Burner User Manual

Chapter 2. Installing and using the Lenovo USB Portable DVD
Burner
This chapter provides information on how to install, use, remove and maintain the drive.

Installing the drive

Before installing the drive, check the locations of the controls on the drive. See "Locating the controls" on
page 1.

Connecting the drive

This section provides instructions to connect the drive to your computer with the provided USB Y cable.
To connect the drive to your computer , do the following:
1. Turn on your computer.
2. Connect both USB A connectors of the USB Y cable, 1 and 2 , to you computer.
3. Connect the USB Mini B connector 3 of the USB Y cable to the USB 2.0 Mini B receptacle connector
4 on the drive.

Installing software

After you have connected the drive to your computer, you can install the software on the Software and
User Guide CD. For the detailed software descriptions, see "Software description" on page 2.
1. Save any open documents and exit all applications.
2. Insert the Software and User Guide CD and do one of the following:
v If the CD starts automatically, go to step 3.
v If the AutoPlay window opens, click Run start.bat. Then, go to step 3.
v If the CD does not start automatically, go into My Computer or Computer, browse the CD/DVD
drive, and double-click Start.bat.
3. At the prompt of the Internet Explorer
content.
4. Select your language.
5. On the left side of the window, click Software.
6. Follow the instructions on the screen.

Loading media

To load a medium into the disc tray of the drive, do the following:
1. Press the Eject button on the drive to open the disc tray.
© Copyright Lenovo 2010
®
warning message, click Yes to allow the CD to run active
5