Do you have a question about the TRIO and is the answer not in the manual?
Questions and answers
Linda Dauphinais
March 23, 2025
J’aurais besoin d’une pièces qui a briser
1 comments:
Mr. Anderson
March 23, 2025
The replacement part needed for the Bullet Express TRIO is a clamp. The motor base works but requires one clamp to be replaced for proper functionality.
Page 2
• Do not place any of the Bullet Express Trio containers or bowls in a microwave. • Unplug the Bullet Express Trio when it is not in use, before putting on or taking off • Never keep the blades running for more than three (3) minutes at a time, as it parts and before cleaning or assembling.
WHAT YOU GET Your Bullet Express Trio has three main component assemblies that perform the multiple functions of the machine. The assemblies are the Meal Maker, Meal Mixer and Juicer. The Motor Base (see below) is the common mechanism that powers the other components.
WHAT YOU GET ASSEMBLING THE BULLET EXPRESS TRIO MEAL MAKER EXPRESS The Meal Mixer Express Assembly is used for a variety of functions including ice crushing, mixing, blending, chopping, mincing, etc. (see components below): ASSEMBLY INSTRUCTIONS MEAL MIXER EXPRESS ASSEMBLY Components: A.
HOW TO USE THE SLICER/SHREDDER DISC MEAL MIXER EXPRESS Use the Slicer/Shredder Disc in the manner required for the desired results. ASSEMBLY INSTRUCTIONS Slicing A. Insert desired blade onto the spindle B. Put ingredients into the Meal For SLICING, the Slicer Blade should be UP. axle of the Meal Mixer Bowl.
JUICER EXPRESS OPERATING THE BULLET EXPRESS TRIO ASSEMBLY INSTRUCTIONS CONTROL PANEL A. Put Juicer Bowl on Motor Body. B. Put Juicer Cover on Juicer Bowl Insert Juicing Filter firmly into Bowl. and lock Safety Clamps firmly with Be sure the Juicer Spout is firmly both hands until you hear a click.
BULLET EXPRESS TRIO PULSE TECHNIQUE A. Wash with warm water and neutral The Bullet Express Trio motor is so detergent and wipe with a dish towel. Do powerful, if you aren’t careful you can not use an abrasive scrubber. Clean the...
Need help?
Do you have a question about the TRIO and is the answer not in the manual?
Questions and answers
J’aurais besoin d’une pièces qui a briser
The replacement part needed for the Bullet Express TRIO is a clamp. The motor base works but requires one clamp to be replaced for proper functionality.
This answer is automatically generated