Rear Panel; Default Settings - Lenovo px4-300d User Manual

Hardware Management

Rear Panel

1. USB 2.0 connectors — Supports devices such as USB storage devices and printers.
2. Gigabit Ethernet Ports — High-speed Ethernet connectors that will automatically detect your network
speed (10/100/1000Base-T).
3. Reset Button — Hold the Reset button for four seconds to reset security and network settings. This
allows you to regain access if network settings are incorrect or you've forgotten your password.
The reset button does not initiate a full factory reset. To perform a full factory reset, select Factory
Reset from the System page in the px4-300d Management Console.
4. Power Connector — Plug the power cable into this connector.

Default Settings

IP Address — If no DHCP server is found on your network the px4-300d will get a self-assigned IP
address in the 169.254.x.x range.
Device Name — The default name for your px4-300d Network Storage is px4-300d. If there are more than
one px4-300d on your network, a number is added to the name, such as px4-300d-1 px4-300d-2, and so on.
Default Shares — Backups, Documents, Movies, Music, Pictures
137 About the px4-300d Network Storage Components