Getting Started
Using the Feature Buttons
Using the Feature Buttons
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W
Status Indicators
The line button indicates the status.
•
Unlit: Idle. Available to place a call.
•
Green (steady): Connected to a call on this phone.
•
Green (flashing): Holding a call on this phone. To resume the call, press the
line button.
•
Orange (flashing): Ringing. To answer, lift the handset, or press
Then press the line button.
•
Red (steady): Connected to a call on another user's phone.
•
Red (flashing): Holding a call on another user's phone. To pick up the call,
press the line button.
•
Orange (steady): There is an error. Contact your phone administrator for
assistance.
Your phone administrator may configure the following types of feature buttons for
your phone.
•
Auto-dial (system speed dial): Press this button to immediately place a
call to the specified user or telephone number. During an active call, you can
press this button to immediately transfer the call. This is a blind transfer, with
no opportunity to talk to the other party or to cancel the transfer.
•
Busy Lamp Field (BLF): Use this button to monitor the specified extension.
Press to call the monitored extension or to transfer an active call to the user
(blind transfer only).
-
Red (steady): The monitored extension is use.
-
Red (flashing): A call is on hold on the monitored extension.
-
Orange (flashing): A call is ringing on the monitored extension. Press the
button to pick up the call.
-
Unlit: The monitored extension is idle.
1
or
.
21