Using Sdc 625 Application Software With All Hart Transmitters And Devices; Introduction - Honeywell MC ToolKit User Manual

Using SDC 625 Application Software with all HART

Introduction

This section contains procedures for using the SDC 625 application software to communicate to any device
with HART communications protocol. It is recommended that you use SDC 625 application software when
communicating with non-Honeywell devices. After double-clicking on the SDC 625 icon, the following
screen often appears. Choose "ignore", it is an indicator that a configuration may have changed.
The following is the main screen for the SDC 625 application software. It is "Tree View" based solely on
the devices DD – Device Description.
Release 3
9/06

Using SDC 625 Application Software with all HART Transmitters and Devices

Transmitters and Devices
34-ST-25-20 MC Toolkit User Manual 61