Calling Up A Preset Ptz Point - GE 30 User Manual

Chapter 4: Basic operation
Front panel key PTZ control
7 Focuses near
15 Focuses far
6 Closes iris
14 Opens iris
Enter Auto focus/iris
Esc Exits PTZ mode

Calling up a preset PTZ point

To call up a preset PTZ point:
1. Click on a camera in the mouse toolbar or use the numeric buttons to select a
camera.
2. Click the PTZ icon in the mouse toolbar or press the PTZ button to display the PTZ
control as shown in the figure below.
3. Click the Preset icon (or press 1 on the front panel or remote control) to access the
Set/Go Preset function as shown in the figure below.
4. Enter a preset number.
5. Click Go Preset. The selected camera adjusts to the settings of that preset
number.
28 TruVision DVR 30 User Manual