Get Started; Turn On; Set The Clock; Select A Source - Philips DCM2260 User Manual

4 Get started

Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.

Turn on

Press .
» This product switches to the last
selected source.
Switch modes
Automatically switch the modes:
• After this product stays inactive for 15
minutes, it automatically switches to the
normal standby mode.
» The clock is displayed.
» If the clock is not set,
• After this product stays in the normal
standby mode for 15 minutes, it
automatically switches to the eco power
standby mode.
»
LCD screen lights off.
» The LED indicator beside the LCD
screen lights in red.
Manually switch the modes:
• Press and hold
• from the working mode or normal
standby mode to the eco power
standby mode, or
• from the eco power standby mode to
the normal standby mode.
8 EN
blinks.
scrolls, and then the
to switch this product
• Press to switch this product
• between the working mode and the
normal standby mode, or
• from the eco power standby mode to
the working mode.

Set the clock

Note
•
During setting, if no action is made within 90 seconds,
the product exits clock setting without saving earlier
operations.
1
In standby mode, press and hold CLOCK
to enter the clock setting mode.
or
»
2
Press + VOL - or
, and then press CLOCK.
or
• : 24-hour time format
• : 12-hour time format
» The hour digits begin to blink.
3
Press + VOL -or
and then press CLOCK.
» The minute digits begin to blink.
4
Press + VOL - or
minute, and then press CLOCK.
» The set clock is displayed.
Tip
•
The product can synchronize its clock with a connected
iPod/iPhone/iPad.

Select a source

On the product, press SOURCE repeatedly to
select a source.
•
connected iPhone/iPod/iPad
• : the audio input through the
AUDIO IN socket
is displayed.
/ to select
/ to set the hour,
/ to set the
: the playlist on the