Advanced Mode: Encoder Profile - Bosch VIP-X1XF Installation And Operating Manual

VIP X1 XF
5.19

Advanced Mode: Encoder Profile

You can change the names and individual parameter values for the encoder profiles.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. Below is
a brief description of the factory default settings for the encoder profiles.
–
–
–
–
–
–
–
–
CAUTION!
Change the profiles only once you are fully familiar with all the configuration options.
In the default setting, Stream 1 is transmitted for alarm connections and automatic
connections. Bear this fact in mind when assigning the profile.
Bosch Sicherheitssysteme GmbH
High resolution 1
High quality for connections with the highest bandwidth, resolution 704 × 576/480 pixels
High resolution 2
High quality for high bandwidth connections, resolution 704 × 576/480 pixels
Low bandwidth
High resolution for low bandwidth connections, resolution 704 × 576/480 pixels
DSL
For DSL connections with 500 kbps, resolution 704 × 576/480 pixels
ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
MODEM
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
GSM
For GSM connections at 9,600 baud, resolution 352 × 288/240 pixels
Installation and Operating Manual
Configuration using a Web browser | en
DOC | V4.54 | 2011.09
47